UAB CDC-697 COMPACT DISC AUTOMATIC CHANGER OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols 1 2 3 4 5 6 7 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
Getting Started CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place with at least 10 cm on the top, 10 cm on the left and right, and 10 cm at the back of CDC-697 — away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
ENGLISH GETTING STARTED Introduction Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
CD PREVENTIVE CARES • This compact disc player is designed only for playing back compact discs bearing the marks shown below. Never attempt to load any other type of disc into the unit. The unit can also play back 8 cm (3 inch) compact discs. Notes • This unit may not be able to play back some CD-R/CD-RW discs or discs on which recording was not made correctly. • This unit is not compatible with a CD-R/CD-RW disc recorded with MP3 or WMA format.
GETTING STARTED PREPARATIONS Supplied Accessories Remote Control Transmitter Batteries (AA, R6, UM-3) x 2 Power cable (U.S.A., Canada, Australia, U.K. and Europe models) The shape of the plug may vary depending on the area where you purchased.
PREPARATIONS Connecting an Amplifier Never plug in this unit and other components until all connections are completed. • Before making any connections, switch OFF the power to the unit and the amplifier or other components. • Connections should be made to the correct input terminals of the amplifier or other components. • If the placement of this unit causes noise in other equipment, such as a tuner, separate them from each other.
PREPARATIONS GETTING STARTED Connecting the power cable After all other connections are completed, plug the power cable to an AC wall outlet. • China, Asia and General models • Other models AC IN To AC wall outlet To AC wall outlet Plug the power cable into the AC IN, then plug the power cable to an AC wall outlet. ■ VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.
CONTROLS AND FUNCTIONS Front Panel 1 2 3 NATURAL SOUND COMPACT DISC PLAYER CDC-697 POWER ON OFF DISC STANDBY /ON 4 1 2 3 5 PLAYXCHANGE 4 5 6 1 POWER ............................................................ P.9 2 Disc tray ............................................................. P.9 3 f (Open/Close) .................................................. P.9 4 STANDBY/ON ................................................. P.9 5 DISC-select .................................................
CONTROLS AND FUNCTIONS GETTING STARTED Remote Control Transmitter STANDBY/ON 1 SYNCHRO DIMMER 2 3 4 OPEN/ CLOSE t TEXT/ TIME PEAK TAPE CLEAR PROG 1 2 3 4 5 6 7 8 9 0 +10 INDEX 5 y u i 6 MODE - OUTPUT LEVEL + 7 DISC SCAN 8 9 0 q w e r DISC SKIP REPEAT RANDOM o p a s d f 1 STANDBY/ON ................................................. P.9 2 SYNCHRO ..................................................... P.17 3 DIMMER ...........................................................
CONTROLS AND FUNCTIONS Display The display located in the center of this unit provides information about discs. ■ Selecting time displays and the text data After closing the disc tray by pressing the OPEN/CLOSE button or selecting any disc by using the DISC SKIP buttons when this unit is stopped, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds.
BASIC OPERATION This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel.
BASIC OPERATION 3 Select a desired disc play mode (1DISC or 5DISCS) confirming it on the display. MODE 1DISC REP RN 5DISCS S F P SEARCH TITLE ARTIST Shows the selected disc mode. “1DISC” mode: The unit will play back a designated disc only. “5DISCS” mode: The unit will play back all discs on the tray in sequence. 4 PLAYXCHANGE During playback, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc playback.
BASIC OPERATION Skipping Tracks Searching ■ To play back from the beginning of the track following the one now playing back ■ To go forward rapidly (Press and hold.) ■ To go backward rapidly ■ To play back from the beginning of the track before the one now playing back (Press and hold.) • The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly.
VARIOUS FUNCTIONS Random Sequence Play You can play back the tracks on one or more discs in a random sequence. The unit will automatically mix up tracks from all discs or a designated disc on the disc tray. DISC SCAN 4 Press the RANDOM button. RANDOM DISC SKIP STANDBY/ON REPEAT SYNCHRO DIMMER 3 TEXT/ TIME PEAK TAPE CLEAR PROG 1 2 3 4 5 6 8 9 0 +10 INDEX MODE - OUTPUT LEVEL REPEAT RANDOM 4 1,2 “RNDM” lights up in the display.
VARIOUS FUNCTIONS Program Play You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks. DISC SCAN 4 If necessary, select a desired disc.
VARIOUS FUNCTIONS ■ Display information during programming 1 2 3 4 5 -- 1DISC REP RNDM SAVE BEST EDIT FILE 5DISCS S F PROG CD- TEXT 1 2 3 4 5 SEARCH TITLE ARTIST TRACK 6 7 8 9 10 STEP 1 11 12 13 14 15 16 17 18 19 20 2 -6 Press the a button. The first programmed track number will be displayed. To resume playback, press the w button. Playback will start from the beginning of the program.
VARIOUS FUNCTIONS Repeat Play Index Search You can play back any desired track or disc (or a set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. If the disc includes index numbers, playback can be started from any desired index number. 1 Select a track which has index numbers. (Off) 1 2 3 4 5 6 7 8 9 0 —10 PLAYING CDS — REPEAT 1DISC REP RNDM SA 5DISCS S F PROG C RCH TITLE ARTIST TRAC 2 Press the INDEX button.
VARIOUS FUNCTIONS Adjusting the Level ■ Adjusting the level of signals output into an amplifier, etc. You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. — — OUTPUT LEVEL — For optimum sound quality * When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max. * The level of output signals can be checked in the display.
CD SYNCHRONIZED RECORDING DISC SCAN 4 If desired, select the track to be recorded first. 1 2 3 4 5 6 7 8 9 0 —10 DISC SKIP or 5 — Using a compatible YAMAHA tape deck, you can synchronize the tape deck to start recording automatically when this unit starts playback. With this function, you can record a CD on tape more easily and precisely. (For details, refer to the operation manual of the tape deck to know whether it is compatible or not.
TRACK PROGRAMMING FOR RECORDING This convenient feature can be used to program tracks for recording to tape. By only memorizing the total possible recording time of the tape, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (For details, refer to page 22.
TRACK PROGRAMMING FOR RECORDING ■ Display information during programming 3 1 2 3 4 5 Manual Tape Programming With this function, you can program tracks from one or more discs in any order to be recorded onto tape.
TRACK PROGRAMMING FOR RECORDING 7 8 Repeat steps 5 and 6 to program more tracks for side A of the tape. You can select the same track again. * If “ERROR” appears in the display, the track number just selected cannot be programmed because there is no enough time remaining on side A of the tape. When you finish the programming for side A, program the pause mode by pressing the TAPE button.
TRACK PROGRAMMING FOR RECORDING Random Tape Programming The unit will automatically program tracks on a disc in random sequential order for recording to tape. DISC SCAN REPEAT DISC SKIP RANDOM 2 3 Notes • Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly.
AUTOMATIC PEAK LEVEL SEARCHING This unit automatically searches for the peak level of the disc, and play back the part repeatedly. When recording to tape, this feature is very helpful for adjusting the recording level on the tape deck. DISC SCAN 4 Press the PEAK button.
TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit’s power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM This unit fails to turn on or enters the standby mode soon after the power is turned on. This unit does not work normally. The disc tray does not close completely.
SPECIFICATIONS Audio Section General Frequency response ...................... 10 Hz – 20 kHz, ± 0.5 dB Power requirements U.S.A. and Canada models .......................... 120 V, 60 Hz Australia model ........................................... 240 V, 50 Hz Europe and U.K. models ............................. 230 V, 50 Hz Asia and General models ................................... 110/120/220/230-240 V, 50/60 Hz China model ................................................
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION – VISIBLE AND / OR INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. VARNING – SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG. VARO ! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA / TAI NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN. VARNING – SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
00_CV4_CDX-697_UAB.
00_CV4_CDX-697_UAB.
© 2006 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND SCANDINAVIA A.
