Owner`s manual

To play with program data
1
2
3 If the FILE indicator is not illuminated in the display,
press the FILE button.
4 Select the disc to be played.
Notes
●
If, in step 4, the SAVE indicator does not illuminate, the disc
does not have its program data in the memory’s file.
●
To stop the play of the filed program data and change to
ordinary play of the disc, press the FILE button. By this
operation, the disc will be played in the ordinary sequence of
tracks, but the program data in the memory’s file for that disc
will not be deleted from the memory. To once again call out
the program data, follow step 3 and 4.
●
In the “ALL” disc play mode, discs which have program data
in the memory’s file are played with their program data, and
others are played normally.
To delete program data from file
1 If the unit is playing a disc, press the STOP button.
* If a program play is on standby, press the STOP
button or the CLEAR button tocancel that
program setting.
2
If the FILE indicator is illuminated in the display, press
the FILE button to turn the indicator off.
3 Select the disc of which program you want to delete.
4
5
To delete all program data from the memory’s
file
1 Turn the POWER off.
2
3
4
15
FILE
SAVE
AUTO
DISPLAY OFF
1234 5
DISC
FILE
FILE
PROG
POWER
FILE
0
FILE
0
(Release.)
The SAVE indicator
goes off.
(Press and hold.)