Manual

This section describes the basic recording operation. The operation steps are explained by using the buttons on the front panel and the remote
control.
Recordingfroman ExternalComponentontothe HDD
2
8 9
8
8
1 • Press BEC.
The HDD mark flashes, and the disc and track numbers to be
recorded are indicated on the display. Recording has not been
started yet at this stage. (Recording pause mode)
Disc number to be recorded Track number to be recorded
2, Select the input source to be recorded.
Press INPUT to select the input source from among
OPTICAL, COAXIAL, and ANALOG. See page 17 for
details.
3, Adjust the recording level.
The recording level can be adjusted for both digital and analog
input. See page 17 for details.
4, Select the disc to be recorded.
See page 20 for details.
5, Select the recording mode.
See page 20 for details.
6, Start recording.
Press _>i_D(_>or _Don the remote control) to start recording.
[):_-;,:;0 0 2, ]. 0:0 i _E°
• In the multi_synchronized or al]_synchronized recording
mode, this unit automatically starts recording when the
source component starts playback.
7, Start playing the source.
8, Press _>_D(;D on the remote control) to stop recording
temporarily.
The HDD mark flashes and the track number is advanced to the
next.
Press _>/[D(e:_or _Don the remote control) to resume recording.
9, Press D to stop recording.
The first track number of the disc at which recording has been
stopped is indicated on the display.
[) :!!;,::;0 0 ....?,'_,. :
IMPORTANT
• Never turn off the power of this unit during recording.
Recording may not be correctly made, or the data on the HDD
may be damaged.
• During recording, make sure that this unit is not subjected to
shock or vibration as the HDD may be damaged.
E-14