Manual

:i_'i__l_Io) -,i'dI_.Ettlo)-,1:1;L,'nlto]_
3 2
6
4
6
4
2
<To start copying>
1 • Press COPY once.
The following message appears on the display, and this unit
enters the copy standby mode. Copying has not been started yet
at this stage.
x I/
•.,q CD -i;_,.,-.
_,ly_ _ _ r_3i: r=q:lffF _
!
...Y a. ,::_1.,::_1,:: p\
2, Select the disc to be copied.
Rotate the MULTI JOG knob (press GROUP SKIP < or
GROUP SKIP _>on the remote control) to select the disc to
be copied to. See page 28 for details.
3. Select the copying mode.
Press MODF-.JSETto select the copying mode. See page 28 for
details.
4, Make detailed settings for copying on the menu.
Press MENU to start setting the copying menu. See page 29 for
details.
_, Start copying.
Press _'.>iED(_>onthe remote control) to start copying.
8 8 ..._,7i ..,q .,._ 8:8 i ', _E':
• It takes a few seconds tbr this unit to t_come ready to start
copying after _>iED(c> on the remote control) has t_en
pressed.
• This unit may create some vibration and rotation noise while
performing the copying process by rotating a CD at high
speed, ffthis problem occurs, lower the copying speed to
decrease the vibration and rotation noise. (See "Copy Speed.
on page 30.)
6. When copying has been completed, the operation of
the HDD and the CD automatically stops.To cancel
copying, press D.
1
Output of the signals during the copying /
• During the copying at lx speed, signals are output both f_om the ANALOG LINE OUT (PLAY)jack and from the DIGITAL
!
OUTPUT (OPTICAL/COAXIAL) jacks.
• During the copying at 2x speed, signals are output only from the ANALOG LINE OUT (PLAY) jack.
• During the copying at 4x or more speed, signals are output neither from the ANALOG LINE OUT (PLAY) jack nor the DIGITAL
OUTPUT (OPTICAL!COAXIAL) jacks.
E-2