Manual

3
2
4
5
4
7 7 5 6
<To start copying>
• This unit can make a high-speed copy onto a CD-R or CD-RW
disc. However there are some audio CD_R or CD_RW discs that
do not support high speed writing. To copy onto these discs, lower
the copy speed. (See "Copy Speed" on page 30.)
1, Press coPY twice.
The following message appears on the display, and this unit
enters in the copy standby mode. Copying has not been started
× I/
IH I"" r' . i;;; i.j,_','r_Ec
!
i "tt- 'i f" I" \ I /
2, Select the group on the HDD to be copied.
Rotate the MULTI JOG knob (press +/- on the remote control)
to select the _oup on the HDD to be copied.
3. Select the copying mode.
Press MODE/SET to select the copying mode. See page 28 for
details.
4, Make detailed settings for your copying on the menu.
Press MENU to make copying menu settings. See page 29 for
details.
5. Start copying.
Press t+iED(t> on the remote control) to start copying.
0 0 0 7 i I,,- + , ,
...;;' .I. 1
• OPC may start on the loaded disc depending on its recording
condition. It takes approximately 15 seconds to complete the
adjustment.
jiLl., \ i_
I" \ /
..... 0 _ F_EC
0 P',..,.... ,..t)::J :.
I \ I
" _ ' ' +' ,,;,_w ]
When the adjustment has been completed, and the message
above turns off on the display, copying automatically starts.
• The pro_ess of elapsed time for the track being copied may
vary by the data processing inside this unit.
6, When copying has been completed, the operation of
the HDD and the CD automatically stops.To cancel
copying, press D.
• ff copying is canceled by D being pressed, only the data that
has been recorded on the CD_R or CD_RW disc before the
cancellation remains on the disc. When ,Digital Move" (see
page 30)is selected, the original data on the HDD Which has
already been copied to a CD-R or CD_RW disc will be
deleted.
7, The TOC indicator flashes if the copied data contains
the title data (disc title etc.) which can be copied to a
CD-R or CD-RW disc.To copy the titles, perform the
finalization before opening the disc tray (See page
19).
'°TEXT Save?" appears on the display if the disc tray has been
attempted to be opened by pressing & (OPEN/CLOSE on the
remote control). To copy the title, perform the finalization. To
open the disc tray, press & (OPEN/CLOSE on the remote
control) again.
• ff the disc tray is opened without performing the finalization,
the title data is not copied to a CD_R or CD_RW disc.
¥
• In the full auto-synchronized copy mode, the finalization is
performed automatically.
E-25