Manual

Duplication of a CD
2 1 3
15
<Preparing a CD>
1 • Press _ (OPEN/CLOSE on the remote control) to
open the disc tray.
2, Load the CD to duplicate on the disc tray.
Place the e_D correctly aligned in the recessed area of the disc
tray with its label side facing up.
When reading about the disc information has been completed,
the following message appears on the display, and this unit
becomes ready for duplicating operation.
Total number of tracks Total time
i
3, Press _ (OPEN/CLOSE on the remote control) to
close the disc tray.
• The disc tray can be also closed by pressing the front edge of
the disc tray gently, ff the disc tray is closed in this way, this
unit starts playback of the CD. Press D to stop playback.
This unit starts reading the disc information (type and capacity
of the disc) When the disc is loaded. It takes approximately 10
to 15 seconds to complete reading.
The following message appears on the display during reading.
\ I /
F?.= .!_,:J:i.n g
/ I \ FcTi )_
E-26