Owner`s manual
E-23
RECORDING AND
COPYING
English
BASIC COPYING OPERATION
<To start copying>
1. Press COPY once.
The following message appears on the display, and this unit
enters the copy standby mode. Copying has not been started yet
at this stage.
2. Select the disc to be copied.
Rotate the MULTI JOG knob (press GROUP SKIP q or
GROUP SKIP w on the remote control) to select the disc to
be copied to. See page 28 for details.
3. Select the copying mode.
Press MODE/SET to select the copying mode. See page 28 for
details.
4. Make detailed settings for copying on the menu.
Press MENU to start setting the copying menu. See page 29 for
details.
NATURAL SOUND HDD/CD RECORDER CDR–HD1000
TEXT/TIME MODE/SET
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL
INPUT
REC
COAXIAL
ANALOG
COPYCDRHDD
MIN MAX
LEVELPHONES
POWER
15
32 4
6
OPEN/CLOSE
COPY REC
TEXT/TIME
INPUT
MODE/SET
MENU
CLEAR
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQR
7
STU
8
VWX
9
YZ
SPACE
SYMBOL
0 +10
BOOKMARK
REPEAT RANDOM INTRO
ENTER
COMPLETE
FINALIZE ERASE
TRACK NO.
WRITE
7
STU
8
VWX
9
YZ
SPACE
SYMBOL
0 +10
BOOKMARK
REPEAT RANDOM
GROUP SKIP
INTRO
HDD CDR
5
2
6
1
34
DIG
REC
GROUP
L
R
dB –30 –10 –6 –20
ALL SYNC
HDD π CD-RW
TOC
CD
DIG
REC
GROUP
L
R
dB –30 –10 –6 –20
ALL SYNC
003 1π 1 000
TOC
CD
5. Start copying.
Press w/d (w on the remote control) to start copying.
Notes
• It takes a few seconds for this unit to become ready to start
copying after w/d (w on the remote control) has been
pressed.
• This unit may create some vibration and rotation noise while
performing the copying process by rotating a CD at high
speed. If this problem occurs, lower the copying speed to
decrease the vibration and rotation noise. (See “Copy Speed”
on page 30.)
6. When copying has been completed, the operation of
the HDD and the CD automatically stops. To cancel
copying, press a.
DIG
REC
GROUP
CD
L
R
dB –30 –10 –6 –20
ALL SYNC
003 1π 1 001
TOC
Output of the signals during the copying
• During the copying at 1x speed, signals are output both from the ANALOG LINE OUT (PLAY) jack and from the DIGITAL
OUTPUT (OPTICAL/COAXIAL) jacks.
• During the copying at 2x speed, signals are output only from the ANALOG LINE OUT (PLAY) jack.
• During the copying at 4x or more speed, signals are output neither from the ANALOG LINE OUT (PLAY) jack nor the DIGITAL
OUTPUT (OPTICAL/COAXIAL) jacks.