Owner`s manual

12
Digital Connections Example
LINE IN — LINE OUT IN OUT
DIGITAL
REC COAXIAL OPTICAL COAXIAL OPTICAL
RS–232C
VIDEO
VIDEO
OUT
S VIDEO
ANALOG
PLAY
R
L
R
L
4 3
R
L
IN OUT
DIGITAL
COAXIAL OPTICAL COAXIAL OPTICAL
IN OUT
COAXIAL OPTICAL COAXIAL OPTICAL
IN OUT
COAXIAL OPTICAL COAXIAL OPTICAL
CDR-HD1500
DAT
COAXIAL
OUT
COAXIAL
OUT
COAXIAL
IN
COAXIAL
IN
OPTICAL
IN
OPTICAL
IN
OPTICAL
OUT
Amplifier
OPTICAL
OUT
You can use a “coaxial” cable or “optical” cable.
2
(When the CD drive is selected) press the HDD button
6
.
The HDD mark appears in the display.
3
Press the REC button
1
.
The “REC” mark lights up and the HDD mark starts blinking.
A Disc group and track 1 will automatically be generated for
recording and they are shown in the display. Recording standby
mode is now engaged.
Destination Disc
number
Destination Track number
Recording Songs on a Previously Recorded Disc
You can designate the Disc and record songs after the previously
recorded Tracks.
Follow the procedure below to select the desired Disc.
1. Confirm that the “GROUP” mark is shown in the display.
Check if “GROUP” is shown.
2. Press the Up/Down buttons
3
to display the desired Disc.
3. Press the ENTER button
5
to select the Disc.
Once the Disc is selected, a blank track available for recording will
automatically be chosen.
■
5
1
6
3
4
2
7
8
9
5
1
6
3
4
2
7
8
9
NOTE
Pressing the Stop button
8
on this
step aborts the operation and exits
the recording standby mode.
NOTE
Pressing the Stop button
8
on this
step aborts the operation and exits
the recording standby mode.