Owner`s manual

Copying Recorded Tracks on the HDD to Music CD-R/RWs/

Finalizing Them

Set a music CD-R/RW onto the disc tray.

You need a blank “CD-R/CD-RW for music” for recording. You can

also use a partially-recorded (but not yet finalized) “CD-R/CD-RW

for music.”

“CD” appears in the bottom right side of the display. “Reading”

appears on the display, and which indicates that the Music CD is

being read by the device. After completion, the display changes as

illustrated below.

If you insert a new CD-R/CD-RW for Music:

If you insert an unfinalized CD-R/CD-RW for Music:

Number of Tracks Total time

NOTE

You may need to adjust the track

numbers of an Album so as not to

exceed the CD-R/RW’s recordable

time.

NOTE

Only music CD-R/RWs can

be used on the CDR-HD1500.

If you insert a CD-R/RW for

computer use (data CD), “Not

Audio” or “Data Track” will

appear in the display, followed by

“Unrecordable.”

For more information, see page 78

in the Owner’s Manual.

NOTE

You may need to adjust the track

numbers of an Album so as not to

exceed the CD-R/RW’s recordable

time.

NOTE

Only music CD-R/RWs can

be used on the CDR-HD1500.

If you insert a CD-R/RW for

computer use (data CD), “Not

Audio” or “Data Track” will

appear in the display, followed by

“Unrecordable.”

For more information, see page 78

in the Owner’s Manual.

Copying HDD Tracks to CD-R/RWs

You can copy tracks to CD-R/RWs by copying tracks from Disc, Album or Bookmark groups.