BG CDR-S1000 Compact Disc Recorder Lecteur/Enregistreur CD REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL CD DIRECT REC MUTE ANALOG REC MIN OPEN/CLOSE / / MAX / PHONES LEVEL OWNER’S MANUAL 10 MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING 0
ENGLISH INTRODUCTION Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT CAUTIONS • • • • • • • • • • • • • • • • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install your unit in a well ventilated, cool, dry, clean place – away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds, locate the unit away from other electrical appliances, motors, and transformers.
DISCS COMPATIBLE WITH THIS UNIT Discs that can be used for recording Be sure to use only CD-R and CD-RW discs made by reliable manufacturers. CD-R and CD-RW digital audio discs that display either of the following marks can be used with this unit. In addition to these marks being present on the disc, check that at least one of the following phrases can also be found on the disc or disc case.
GETTING STARTED After unpacking, check that the following parts are contained. English Supplied accessories • Batteries (size AA, UM-3, R6) (2) • Remote Control REC MODE TRACK NO.
GETTING STARTED The remote control Loading the batteries for the remote control Remote control operation range NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO.
GETTING STARTED English Connections Do not plug in this unit or other components until all connections are completed. • • • • • Connections should be made to the correct input and output jacks of the amplifier or other components. To record a wider variety of sources, it is recommended to make both analog and digital connections to this unit. ) in the illustration below indicate the direction of the audio signal.
GETTING STARTED Analog connections using the LINE IN and OUT jacks • Be sure that the left (“L”) and right (“R”) LINE IN (REC) and LINE OUT (PLAY) jacks are connected correctly. • Connect the LINE IN (REC) and LINE OUT (PLAY) jacks to the “MD/DAT” (or equivalent) jacks of the amplifier or receiver. For additional details concerning these connections, refer to the operating instructions for the amplifier being used.
NAMES OF BUTTONS AND CONTROLS English Front panel NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO. EFFECT REC MODE FINALIZE ERASE DISPLAY CD DIRECT REC MUTE OPEN/CLOSE / ANALOG REC MIN POWER / MAX / PHONES LEVEL 0 ~ Ÿ ! ⁄ @ ¤ # ‹ $ › % fi ^ fl & ‡ * ° ( · ) POWER (P.10/P.11) TRACK NO. (P.18) EFFECT (P.19) REC MODE (P.13 to P.15) Remote control sensor (P.5) Display (P.11) CD DIRECT (P.18) REC MUTE (P.16) REC (P.13 to P.16) INPUT (P.
NAMES OF BUTTONS AND CONTROLS Remote control REC MODE TRACK NO. OPEN/ WRITE DIMMER DISPLAY CLOSE EFFECT REPEAT RANDOM CLEAR 1 2 3 INDEX 4 5 6 +10 7 8 9 0 FINALIZE ERASE REC REC MUTE SEARCH STOP E-9 PROG SKIP PAUSE PLAY ~ Ÿ ! ⁄ @ ¤ # ‹ $ › % fi ^ fl & ‡ * ° ( · ) RANDOM (P.26) TRACK NO. WRITE (P.18) REC MODE (P.13 to P.15) EFFECT (P.19) REPEAT (P.27) Numeric buttons (P.23/P.25/P.27) FINALIZE (P.20) ERASE (P.21/P.22) ! SEARCH ⁄ (P.24) STOP & (P.23) PAUSE * (P.23) DIMMER (P.
BASIC OPERATION NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO. EFFECT REC MODE CD DIRECT REC MUTE ANALOG REC MIN POWER FINALIZE ERASE DISPLAY OPEN/CLOSE / MAX Note • You can also close the disc tray by pressing the front edge of the disc tray gently. Play begins automatically if the tray is closed by pressing ^ on the front panel or PLAY #, a numeric button, or RANDOM on the remote.
BASIC OPERATION Removing the disc and turning the power off Important Do not turn off the power during finalization of a CD-R or CD-RW disc (after recording). Doing so may result in a misoperation in which recorded material may be lost and further recording on the disc made impossible. For more information on finalization of CD-R and CD-RW discs, please see page 20. Selecting a time display You can change the disc information that is shown in the display by pressing DISPLAY.
RECORDING FUNCTIONS This recorder features a number of recording modes allowing you to make recordings from a wide variety of program sources (both analog and digital). • When using this unit to make recordings, subcode information that may be present in the source audio signal such as CD TEXT, index data, etc., will not be recorded. Before recording • Set your amplifier or receiver to the source to be recorded.
RECORDING FUNCTIONS Synchronized recording of a single track 4 This is a recording mode suitable for compiling single tracks from different audio sources. A new track marker is automatically placed at the start of the track. REC REC MODE 5 INPUT NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO.
RECORDING FUNCTIONS This is a recording mode suitable for recording all of the material from a single audio source such as a CD, MD, cassette, or LP. Track markers are automatically placed between the tracks being recorded. REC REC MODE REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL EFFECT REC MODE CD DIRECT REC MUTE ANALOG REC MIN POWER FINALIZE ERASE DISPLAY OPEN/CLOSE 5 INPUT NATURAL SOUND CD RECORDER CDR-S1000 TRACK NO.
RECORDING FUNCTIONS Synchronized recording with finalization The Full AUTO synchronized recording mode automatically performs finalization after ALL track synchronized recording (described on the previous page). Finalization is the final process in recording a CD-R disc that makes it playable on standard CD players. (CD-RW discs can only be played back on a CD-RW compatible player, even if finalization is performed.) Refer to page 20 for more information on finalization.
RECORDING FUNCTIONS This is a recording mode used when manual control of the recording is required or preferred. (Please note that synchronized recording (single or ALL) is recommended when making a digital recording from CD or MD, etc.) REC MUTE REC INPUT NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO.
RECORDING FUNCTIONS Setting the analog recording level Setting the recording levels REC LEVEL DIGITAL/ANALOG INPUT NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO.
RECORDING FUNCTIONS You can manually mark tracks as you like anywhere in your recording. TRACK NO. NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO. EFFECT REC MODE CD DIRECT REC MUTE FINALIZE ERASE DISPLAY OPEN/CLOSE / Because CD discs are recorded at a sampling rate of 44.1 kHz, this unit makes it possible to make a direct recording of another CD disc that bypasses unnecessary digital processing such as the sampling rate converter.
RECORDING FUNCTIONS Applying dynamic range compression to a recording CD discs can be enjoyed in car CD players, but often sounds can get lost when competing with engine noises and other factors. To remedy this problem, this recorder features an effect that essentially records a compressed sound range in which soft sounds are boosted and louder sounds are lowered and produces music that can be more fully enjoyed when listening to CDs in a car or similar environment.
RECORDING FUNCTIONS 1 Finalization is the process that concludes recording, and allows a CD-R disc to be played on a standard CD player. (Please note that CD-RW discs can only be played on a CD-RW compatible player even after finalization has been performed. CD-RW discs cannot be played on a standard CD player.) • Please note that once a CD-R disc is finalized, recording is no longer possible. Please ensure the disc is in its final form before performing finalization.
RECORDING FUNCTIONS Track and Disc Erase (CD-RW discs only) CD-RW discs can be erased and new recordings can be made after material has been erased. The following types of erasing are possible with this unit. To select an erase mode Each time ERASE is pressed, the Erase mode changes as follows. CD-RW discs that have not been finalized: Erase off = Last Track Erase = All Track Erase ± Finalized CD-RW discs: Erase off = TOC erase Last Track Erase Erases the last track.
RECORDING FUNCTIONS 1 2 3 4 English All Track Erase Load a CD-RW disc that has been recorded on. • This function is not possible on a finalized CD-RW disc. Press ERASE until “Erase ALL?” appears on the display. • If you want to cancel the Erase mode, press & (STOP & on the remote). Press ^ (PLAY # on the remote) to start the All Track Erase process. • This process requires from several seconds up to 3 minutes depending on the amount of recorded material.
PLAYBACK FUNCTIONS To pause play temporarily Playing a CD disc This unit is capable of playing CD, CD-R and CD-RW discs. During playback, press ^ (PAUSE * on the remote). To resume play, press ^ (PAUSE * or PLAY # on the remote). To stop play completely NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO.
PLAYBACK FUNCTIONS NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT Scanning forward or backward rapidly DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO. EFFECT REC MODE CD DIRECT REC MUTE ANALOG REC MIN POWER FINALIZE ERASE DISPLAY OPEN/CLOSE / MAX / / PHONES LEVEL NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL 0 10 TRACK NO.
PLAYBACK FUNCTIONS Display information during programming Program play 1 You can enjoy listening to your favorite tracks in any desired order by programming tracks. NATURAL SOUND CD RECORDER CDR-S1000 CD-RW CD 32 44 .1 48 PROG RNDM REPEAT SF TOTAL REMAIN SINGLE ALL AUTO EFFECT REC MODE CD DIRECT REC MUTE FINALIZE ERASE DISPLAY OPEN/CLOSE / DIGITAL/ANALOG ANALOG $/! ⁄/› REC MODE CLEAR TRACK NO.
PLAYBACK FUNCTIONS 1. During program play, press & (STOP & on the remote). 2. Press PROG on the remote. 3. Each time ⁄/› (SKIP › on the remote) is pressed, the programmed track numbers and their order in the program can be checked one after another. Each time $/! (SKIP $ on the remote) is pressed, the programmed track numbers and their order in the program can be checked in reverse sequential order. Random sequence play You can play all the tracks on a disc in a random sequence. REC MODE TRACK NO.
PLAYBACK FUNCTIONS Repeat play Index search You can play a single track or the entire disc repeatedly. REC MODE If the disc includes index numbers, play can be started from any desired index number. TRACK NO. OPEN/ WRITE DIMMER DISPLAY CLOSE EFFECT REPEAT RANDOM CLEAR PROG REC MODE REPEAT 1 2 3 TRACK NO.
OTHER FUNCTIONS You can select the brightness level of the display as it suits your preferences. Listening with headphones English Changing the brightness of the display Connect the headphones to the PHONES jack and adjust the volume by using LEVEL. NATURAL SOUND CD RECORDER CDR-S1000 REC LEVEL INPUT DIGITAL/ANALOG OPTICAL COAXIAL TRACK NO. EFFECT REC MODE CD DIRECT REC MUTE ANALOG REC MIN REC MODE TRACK NO.
ADDITIONAL INFORMATION CD preventive care • This compact disc recorder is designed for use with compact discs bearing the , , or marks only. Never attempt to load any other type of disc into the unit. The unit will also play 8-cm (3-inch) compact discs. • Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc’s play. • Do not use cleaning discs or warped discs. All of these could damage the unit.
ADDITIONAL INFORMATION Can’t Copy Digital recording cannot be performed. (See “SCMS copy protection” on page 32.) Disc Full Recording is not possible because there is no blank space remaining on the disc. Track Full Erase DISC? Erases all of the information a CD-RW disc. If you want to erase all of the information, press ^ (PLAY # on the remote). Erase TOC? Erases the TOC (Table Of Contents) on a CD-RW disc. If you want to erase the TOC, press ^ (PLAY # on the remote).
ADDITIONAL INFORMATION Troubleshooting If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. When talking to the service center, the CDR-S1000 may be needed. For details, contact your authorized YAMAHA dealer or service center.
ADDITIONAL INFORMATION English SCMS copy protection As a digital audio component, this CD recorder conforms with the Serial Copy Management System (SCMS) standards. The Serial Copy Management System restricts copies made by recording digital signals to first generation copies only. Therefore, a CD disc recorded using a DIGITAL IN jack cannot be used as a source for making another digital recording. However, subsequent recordings can be made from the first generation copy by using the ANALOG jacks.
ADDITIONAL INFORMATION CD-Recorder system notes and limitations About track length and number • The CD specifications state that the minimum length of a CD track must be 4 seconds. If a recording is stopped while the track is less than 4 seconds long, the unit will record silence until the 4 second track length requirement has been reached, and then stop recording. • CD discs can be recorded with up to 99 tracks on them. Recording will be automatically stopped if the 99 track limit is exceeded.
ADDITIONAL INFORMATION English Specifications Audio Performance General Frequency response ...................................................................... 5 - 20,000 Hz, ±0.5 dB S/N ratio Playback ................................................................................ 107 dB Recording ................................................................................ 90 dB Total harmonic distortion (1 kHz) Playback .............................................................................
