User manual

Using iXOS-JUKEMAN
iXOS-JUKEMAN 2.2 User Manual Pre.12/97122
moves the disk from drive 3 back to its slot.
Note that the drive must be active (not disabled by a drive=! line in the
device description file) to be accessible for move commands (see “Drive
set-up” on page 54).
Test disks
cdadm testcd <device> <list>
The command testcd can be used to test the contents of slots, espe-
cially to make newly inserted disks known to the server.
Example:
cdadm testcd jb.dev 27
instructs iXOS-JUKEMAN, to move the disk from slot 27 to a drive and to
check its contents.
cdadm testcd jb.dev 12-45
tests the disks in slots 12 through 45. See also “cdadm testcd
<device> <list>” on page 233.