User manual

Using iXOS-JUKEMAN
iXOS-JUKEMAN 2.2 User Manual Pre.12/97126
Name Unit Default value Minimum Maximum
autodc
1 0 2
blanks
0 0 2
fullvn
0 0 1
ignore
0 0 1
iotimo
seconds 60 0 3,600
loglev
4 0 9
lwords
5 0 9
mdelay
3 0 99
rahead
3 0 1000
trayto
seconds 60 0 99,999,999
Static parameters
cdnfsp=100003
This parameter defines with which program number iXOS-JUKEMAN reg-
isters its NFS service, if no other program of that kind exists. Value 0
means no registration.
dcheck=300
iXOS-JUKEMAN performs a periodic disk check for single drives and tow-
ers. This simplifies changing of disks, since no interaction with the server
is required. The change is detected automatically.
The parameter defines a time intervall in centiseconds. After this time
iXOS-JUKEMAN checks whether a disk has been changed. Value 0 turns
off the check.
jobnum=192
Defines how many file system requests the server can queue internally. If
you have more than 1,000 clients, increase this number.
maxcvt=1000
This parameter defines how many nodes the view tree of the controlled
disks can have.
maxthr=40