User manual

Server parameters
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 127
Specifies how many processes can be started.
mountp=20000234
Defines the program number the server uses to register its mount service
if there is no such program already registered. Use 0 for no registration at
all.
nonfsd=0
Set this parameter to 1 to prevent the NFS server built in iXOS-JUKEMAN
from starting. This is only useful on Windows NT, as NFS is the only way
to connect to the file system if iXOS-JUKEMAN is running on UNIX.
portno=4027 (UNIX) or 2049 (NT)
Defines the UDP port for NFS and cdadm requests.
rtrack=131072 (128 KB)
Defines the size of chunks of files to be cached in the data cache (in RAM
or as a file). This value must be a multiple of 8,192 (8 KB) sein.
synclm=0
With a value of 1 log messages will not be buffered but written directly to
the log file.
waitpm=0
This parameter defines the time (in seconds) the server waits for a de-
layed portmapper to be started.
The following table lists the static paramters as well as the units, the de-
fault values, the minimum and the maximum values:
Table 6 - Static parameters
Name Unit Default value Minimum Maximum
cdnfsp
100,003 0 99,999,999
dcheck
1/100 seconds 300 0 999,999
jobnum
192 9 8,192