User manual

Using iXOS-JUKEMAN
iXOS-JUKEMAN 2.2 User Manual Pre.12/97130
4.11.2 Change server parameters
GUI Windows NT
Select [CONFIGURATION]-PARAMETERS:
The dialog shows a list of server parameters along with their current val-
ues, their permanent values from the file server.cfg and the default
values.
Select the parameter you wish to change and click [EDIT], double-click
the parameter.
In the “Permanent” text field, the value in the file server.cfg can be
set. In the “Current value” text field, the value can be changed dynami-
cally while the server is running. This only works for some parameters
(see “Table 5” on page 125).
Click [OK] to confirm the changes, click [CANCEL] to discard the
changes.