User manual

Command line index
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 215
cdadm attach <device> [-d <drive> ]
Function:
Attach the specified device (or drive) to the server. The effect of this
command is that the device and its volumes are controlled by iXOS-
JUKEMAN. The device (or drive) cannot be accessed unless it is at-
tached.
The parameter <device> represents a valid device description file in the
JUKEMAN directory. These files have the extension .dev. The extension
may be omitted in the command.
If the optional parameter -d <drive> is specified, a drive locked dynami-
cally with cdadm detach -d… will be attached again. <drive> is the logi-
cal drive number.
To attach a device automatically when the server starts up, add it to the
file server.cfg (see “Configuration file server.cfg” on page 237).
Example:
cdadm attach p18.dev
cdadm attach p18 (equivalent)
Error messages:
Error message Meaning
attach p18: No device descrip-
tion file
*error* -1
Device description file not found.
attach p18: name in use
*error* -1
Device already attached.
attach