User manual

Command line index
iXOS-JUKEMAN 2.2 User Manual Pre.12/97218
cdadm detach <device> [-d <drive> ]
Function:
Detach the specified device (or drive) from the server. The device and its
volumes are no longer controlled by iXOS-JUKEMAN. The device (or
drive) cannot be accessed until it is attached again.
The parameter <device> represents a valid device description file in the
JUKEMAN directory. These files have the extension .dev. The extension
may be omitted in the command.
If the optional parameter -d <drive> is specified, the drive with the logical
number <drive> will be locked dynamically, while the server is running.
This locked drive will not be used for any further file requests to the
server. However, it is possible to move disks into this drive with cdadm
movecd… and to remove disks from this drive (e. g., to use the drive for
writing disks).
Example:
cdadm detach p18.dev
cdadm detach p18 (equivalent)
Error messages:
Error message Meaning
No such device
*error* 19
Device is not attached or does not
exist.
detach