User manual
Installation
iXOS-JUKEMAN 2.2 User Manual Pre.12/9722
2.2 Requirements
2.2.1 Supported operating systems
iXOS-JUKEMAN runs with the following operating systems:
• AIX 4.*
• DEC UNIX 4.0 (Alpha processor)
• IRIX 6.2, 6.4
• HP-UX 10.*
• Windows NT 3.51, 4.0 (with Alpha or Intel processor)
• Solaris 2.4, 2.5, 2.51, 2.6
An updated list can be ordered from support@europe.jukeman.com.
2.2.2 System requirements
• At least 32 MB memory, 64 MB recommended for burning disks.
• At least one SCSI controller. It is recommended to have a recorder
connected to a separate SCSI controller if you wish to use a recorder
with cdglow. For best results we recommend using Adaptec control-
lers (2940, 3940). There may be SCSI problems with IBM and Mylex
RAID controllers on Windows NT.
• 20 MB hard disk space for the software. The directory cache size de-
pends on the number of disks and files on each disk. To evaluate disk
space requirements see “Set up caches and buffers” on page 36.
• A hard disk buffer must be configured before using the incremental file
system. The buffer size required depends on the amount of data to be
held in the buffer.
• Sufficient free space for the database “volumes” in which iXOS-
JUKEMAN stores information about the disks. About 2 kB per licensed
disk will be needed.
• TCP/IP must be configured on the iXOS-JUKEMAN server (IP address
etc.). The protocol used for the network is irrelevant.