User manual

Command line index
iXOS-JUKEMAN 2.2 User Manual Pre.12/97228
cdadm setpar <key> <value>
Function:
Set the server parameter <key> to <value>. Refer to the section “Server
parameters” on page 245 for a list of all parameters. Server parameters
also may be set in the configuration file server.cfg. Note that some pa-
rameters cannot be changed while the server is running. See “Static pa-
rameters” on page 126.
Example:
cdadm setpar loglev 2
Error messages:
Error message Meaning
No parameter "xyz" available
*error* -1
Wrong <key> parameter given.
setpar