User manual

Configuration file server.cfg
iXOS-JUKEMAN 2.2 User Manual Pre.12/97246
Name Unit Default Min. Max. Function
autodc
1 0 2 Caching behavior
blanks
0 0 2 CD type assumption/test
cdnfsp
100003 0 99999999 Program ID of NFS service
dcheck
1/100 Sec. 300 0 999999 Periodic drive checking
fullvn
0 0 1 PC name format (8.3 or 32)
hfsiso
1 0 1 Hybrid CDs: 0=HFS, 1=ISO
ignore
0 0 1 Lock server, ignore requests
iotimeo
seconds 60 0 3600 Time-out for failed disk read
jobnum
192 9 8192 Number of queue entries
loglev
4 0 9 Level of log messages
lwords
5 0 9 Internal log messages level
maxcvt
1000 10 65536 Number of nodes for views
maxthr
40 12 1024 Maximale Anzahl Threads
mdelay
3 0 99 Delay for disk changes
mountp
20000234 0 99999999 Program ID of mount service
nonfsd
0 0 1 Startup behav. of NFS server
portno
4027 1 65536 UDP port number
rahead
3 0 1000 Number of chunks read ahead
reject
1 0 2 Reject of incomplete disks
rtrack
Bytes 131072 8192 16777216 Data block size for caches
synclm
0 0 1 Log message buffering
trayto
seconds 60 0 99999999 Delay for mail slot close
waitpm
seconds 0 0 3600 Wait delay for portmapper
Example:
parameters {
dcheck { 300 }
loglev { 3 }
}
This example sets the dcheck server parameter to 300 and the log level
loglev to 3 when the server starts up.
7.2.5 Comments
This section contains any comments and remarks that you wish to put in
the server.cfg file. Everything in this section will be ignored when the