User manual

Setting up iXOS-JUKEMAN
iXOS-JUKEMAN 2.2 User Manual Pre.12/9760
3.4.6 How to set up devices
GUI Windows NT
Select [DEVICES]-NEW... or click [NEW...]:
Entering the device name
Type a device name into the Name field. This name may be 8 characters
long. This will also be the name of the device description file and the save
file that will be created in the JUKEMAN directory (with the extension
.dev/.sav).
Setting up device type, drives and robot
For a quick set-up of the device description file, the 'Device Wizard' can
be used. Many devices report their assigned SCSI IDs on request, allow-
ing iXOS-JUKEMAN to add the drives to the device description file auto-
matically.
When running the automatic drive detection you should switch off all con-
nected jukeboxes except the one to be configured.
Click [DEVICE WIZARD] to start the drive detection. The device wizard
tries to find out as much as it can about the connected devices and to fill
out the “Device Type”, “Drive” and “Robot” fields. In case a device is not
detected by the device wizard, these fields must be completed by hand.
device name
device type
(see page 53)
robot
(see page 56)
drives
(see page 54)
start-up behavor
used slots
(default: all slots)