User manual

Set up devices
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 63
CD or Sony CDZ-R360), all possible selections will be listed in this
field. If the robot is a serial line (as with Kubik- or NSM jukeboxes),
the available serial interfaces and Robot IDs will be listed. See
section “Robot set-up” on page 56. Select the appropriate robot
from the list.
If no robot is to be specified (e. g., Pioneer 6), this field is greyed
out.
Drives/Files
Each drive of a jukebox (or one or more files for a hard disk image)
must be specified. Click [ADD...], to select the drives or files. Click
[REMOVE LAST DRIVE] to remove the last drive of the list. To
change the properties of the defined drive, select the drive from the
list and click [DEFINE DRIVE].
The 'Define Drive' dialog lists all drives available, including a de-
fective/missing entry for defect or missing devices. If for example
the second drive of your jukebox is missing or not working, the
second drive must be defined as defective/missing to assure the
drives are accessed properly.
The drives must be added in the same order of the drives in the
jukebox. In the “Properties” group in the upper left of the dialog,
you can select the properties of the drive:
• Not available or defect is the same as defective/missing.