User manual

Setting up iXOS-JUKEMAN
iXOS-JUKEMAN 2.2 User Manual Pre.12/9764
• Not used by file system can be selected for drives that will be
dedicated to writing disks (see “Production of CDs in jukeboxes”
on page 141).
• In all other cases select Normal use by file system.
These drive properties can be changed at a later time by double-
clicking on a drive in the device definition dialog.
Click [OK] to define the drive. Click [CANCEL] to discard the
changes.
Confirming or discarding the device set-up
Click [OK] to confirm the device set-up. If the server was stopped, it can
be restarted with [SERVICE]-START JUKEBOX SERVICE. The devices
marked as “Attach at Server Start” will be attached. All specified slots
will be scanned for disks, and the directory structure will be stored in the
directory cache. This may take a while, depending on the type of jukebox
and the number of slots to be read.
Click [CANCEL] to discard the set-up.