User manual

Setting up iXOS-JUKEMAN
iXOS-JUKEMAN 2.2 User Manual Pre.12/9780
/views_pc -ro
/views_rr donald daisy garfield localhost
These lines will export /views_pc read-only to all hosts and /views_rr
to the hosts donald, daisy, garfield and the server itself. Please
keep in mind that the entry localhost is mandatory when specifying
certain hosts.
On Solaris the exported file systems are listed in the file
/etc/dfs/dfstab. To export the standard views, add the following lines
to the file:
share -F nfs /views_pc
share -F nfs /views_rr
On some UNIX systems (Solaris and others), the change does not take
effect immediately. On Solaris, call the commands unshareall and
shareall to update the export list. Other UNIX systems offer the ex-
portfs command. Use exportfs -a to export all file systems. Another
method is to reboot the server. You can easily test if the directories are
exported by using showmount -e. When you start iXOS-JUKEMAN, it
tests whether the directories for all views are exported by requesting the
file handle from rpc.mountd. It stops if it cannot get a file handle, and
prints a message in the log file.
3.6.2 The client side
Windows clients
As soon as the directories representing the views are shared on the
server it is possible to map the directories as network drives on the client
PC.
For instance, the view jukeman on the server jukeserver is shared. To
use it from a client, you can select Map Network Drive from the explorer: