User Manual

Chord Tracker Manual
4
Player screen
Opened by selecting a song on the Music Library screen, this screen is used to
automatically analyze the song’s chords.
Here, you can play the selected song, display its chords, and edit them if necessary.
1 Tap to open the Activity List screen (See
the screenshot on page5 for details).
2 Details of the selected song (i.e., name,
artist, album, and artwork).
3 Transport area (See the screenshot on
page5 for details).
4 Chord Display area
Each block corresponds to one beat from
the song.
Tap a block to move the playback-position
cursor to the corresponding beat.
Tap the block at the cursor position
to open the Chord Edit screen (See
page6).
Tap and hold a block to copy, paste,
or delete. Whenever you perform an
operation, [
] is displayed. You can tap
it to undo your last operation.
NOTE
Tap and hold a block to send the selected chord
sequence to the currently connected musical
instrument as Chord Looper Data. Depending on
the instrument, this function may not be available.
5 Tap to maximize the Chord Display area.
6 Tap to display the chord at the cursor
position using staff notation.
7 Tap to display the chord at the cursor
position as notes on a keyboard.
8Tap to display the chord at the cursor
position using a guitar tablature (tab). You
can tap [Capo] to set the capo position.
9 Tap to display the Playback Settings
screen (See page8).
) Tap to close the Player screen.
1
2
)
5 6 7 8 9
3
4