DVD Player User Manual

Connections

U Connect the speaker cable with the white line to

the + connector on the front/center/surround

speaker and with the black band to the

- connectol:

Lever

-- +

!lack__ _ Wllite

ice

Dane

Press the lever down.

Lhen insert the cable

into the hole and

release the leve_

q[_ Connect the speaker cable with the white line to

the + connector of each terminal on the

subwoofer and with the black band to the

- connectol:

Lever

O Connect the subwoofer to the DVD receiver using

the system control cable from the subwoofer to

the TO NX-SW300 terminal at the rear of the

DVD receiver.

Notes:

- Ensure that the speaker cables are correctly

connected, Improper connections may damage the

system due to a short-circuit.

- When connecting the speakers, _x the speaker

cables in place so that cables do nat leasen. If your

foot or hand accidentally gets caught on a lease

speaker cable, the speaker may fall.

- To prevent unwanted noise, do not place the

subwoofer too close to the DVD receiver, AC power

adaptor, TV or other sources of radiation.

Lift up the lever, then

insert the cab[e into

the hole and replace

the lever.