User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Panel controls
CK88 CK61 Owner’s Manual
16
L DRIVE [ON/OFF] button
DRIVE [DEPTH] knob
Drive type select buttons
For setting Drive, which applies on overdrive effect to
the currently selected Part.
Use the [ON/OFF] button to turn Drive on or off, and
use the [DEPTH] knob to adjust values. Use the Drive
Type select buttons to select a type.
M EFFECT 1 [ON/OFF] button
EFFECT 2 [ON/OFF] button
EFFECT [DEPTH] knob
EFFECT [RATE] knob
EFFECT [TYPE] knob
EFFECT1–EFFECT2 select button
For applying Insertion Effects to the currently selected
Part. The Insertion Effects are applied in a path to
Effect 1 and then to Effect 2.
Use the [ON/OFF] button to turn the Effect on or off,
and use the EFFECT1–EFFECT2 select button to select
EFFECT1 or EFFECT2. The [TYPE] knob is used to select
a type, the [DEPTH] knob to adjust the Insertion Effect
depth, and the [RATE] knob to adjust the Insertion
Effect rate.
NOTE
Simultaneously press the [ENTER] and EFFECT1–EFFECT2 select
buttons to swap the EFFECT 1 and EFFECT 2 settings. This
conveniently lets you change the order of the applied effects
(page 42).
There are various types of Insertion Effects with
different characteristics.
There are 10 effect type categories available. The
category lamp for the selected effect type lights up.
For more information on the effect types, see the
“Effect list” on page 43.
NOTE
By holding down the [ENTER] button and operating the EFFECT
[TYPE] knob, you can select the first item of the previous or the next
category. This is convenient for quickly finding the category you
wish to use (page 42).
Type Description
O.Drive
Warm distortion effect (overdrive)
Dist
Hard rock distortion
Rotary A
Standard rotary speaker for organ.
Rotary B
The rotary speaker connected to a transistor
preamplifier with strong distortion.
Comp
Versatile compressor controlled by a single knob
Category Description
Chorus
Adds spaciousness and thickness to the sound,
as if multiple sounds are played at once.
Flanger
Creates metallic sweeping sounds like a jet
plane.
Phaser
Creates a phase-shifting effect that uses
feedback circuitry as well as phase shift circuitry
that mixes the phase-shifted sound with the
original sound.
Trm/Rtr
Trm (Tremolo) is an effect that cyclically
modulates the volume.
Rtr (Rotary Speaker) is an effect that simulates a
rotary speaker, which is popular for Organ
sounds.
Dist
An effect that distorts sounds.
Comp/EQ
Comp (compressor) is an effect that compresses
loud sounds or boosts soft sounds to even out
the dynamics of the audio signal.
EQ is an effect that changes the tonal character
of the sound.
Wah
Creates a characteristic “wah-wah” sound by
changing the frequency response of the filter.
Delay
Creates echo effects by delaying the time of the
input sound.
Reverb
Creates a sense of space and ambience by
artificially producing complex echoes.
Others
Other types of effects that are not included in
the above categories.
12
3
4
5
6
7
8
9
)
A
F
!
@
B
G
H
#
$