User Manual

Lista de datos
CK88 CK61 Manual de instrucciones
56
Formato de datos MIDI
1 Alcance
Las especificaciones aquí descritas se aplican a la transmisión y recepción de datos MIDI
mediante un teclado de escenario CK88 o CK61.
2 Conformidad
Las especificaciones aquí descritas son conformes con el estándar MIDI 1.0.
(1) TRANSMIT FLOW
MIDI <-+--[SW1]--+---------NOTE OFF 8nH
OUT |
| +---------NOTE ON 9nH
| |
| +---------CONTROL CHANGE
| | SUSTAIN BnH,40H
| | ASSIGNABLE CONTROLLER BnH,(01H...77H)
| |
| |
| |
| |
| |
| +--[SW3]--BANK SELECT MSB BnH,00H
| | BANK SELECT LSB BnH,20H
| |
| +--[SW4]--PROGRAM CHANGE CnH
| |
| +---------PITCH BEND CHANGE EnH
|
+-------------------SYSTEM REALTIME MESSAGE
| ACTIVE SENSING FEH
|
+--[SW2]--+---------SYSTEM EXCLUSIVE MESSAGE
| |
| +---------<BULK DUMP>
| | F0H 43H 0nH 7FH 1CH bhH blH 0BH ahH amH
| | alH ddH....ddH ccH F7H
| |
| +---------<PARAMETER CHANGE>
| F0H 43H 1nH 7FH 1CH 0BH ahH amH alH
| ddH...ddH F7H
|
+-------------------SYSTEM EXCLUSIVE MESSAGE
IDENTITY REPLY
F0H 7EH 7FH 06H 02H 43H 00H 41H ddH ddH
mmH 00H 00H 7FH F7H
dd: Device family number/code
CK61: 62H 06H
CK88: 63H 06H
mm: version
mm =(version no.-1.0) * 10
e.g.)version 1.0 mm =(1.0-1.0) * 10 = 0
version 1.5 mm =(1.5-1.0) * 10 = 5
[SW1] MIDI Transmit Channel
Cumple con el canal de transmisión de zona cuando el SW del modo de teclado
maestro está activado.
Cumple con el canal de transmisión MIDI en todos los demás casos.
[SW2] SYSTEM MIDI Device Number
Cuando se establece en “all” (todos), se transmite a través de “1”.
[SW3] SYSTEM Bank Select Switch
[SW4] SYSTEM Program Change Switch
(2) RECEIVE FLOW
MIDI >-+--[SW1]--+---------NOTE OFF 8nH
| |
| |---------NOTE ON/OFF 9nH
| |
| +---------CONTROL CHANGE
| | MODULATION BnH,01H
| | PEDAL WAH BnH,04H
| | CHANNEL VOLUME BnH,07H
| | EXPRESSION BnH,0BH
| | SUSTAIN BnH,40H
| | SOSTENUTO BnH,42H
| | SOFT BnH,43H
| | PORTAMENTO CONTROL BnH,54H
| |
| +--[SW3]--BANK SELECT MSB BnH,00H
| | BANK SELECT LSB BnH,20H
| |
| +---------CHANNEL MODE MESSAGE
| | ALL SOUND OFF BnH,78H
| | RESET ALL CONTROLLERS BnH,79H
| | ALL NOTES OFF BnH,7BH
| | OMNI MODE OFF BnH,7CH
| | OMNI MODE ON BnH,7DH
| |
| +--[SW4]--PROGRAM CHANGE CnH
| |
| +---------PITCH BEND CHANGE EnH
|
+-------------------SYSTEM REALTIME MESSAGE
| ACTIVE SENSING FEH
|
+--[SW2]--+---------SYSTEM EXCLUSIVE MESSAGE
| |
| +---------<BULK DUMP>
| | F0H 43H 0nH 7FH 1CH bhH blH 0BH ahH amH
| | alH ddH...ddH ccH F7H
| |
| +---------<PARAMETER CHANGE>
| | F0H 43H 1nH 7FH 1CH 0BH ahH amH alH
| | ddH...ddH F7H
| |
| +---------<BULK DUMP REQUEST>
| | F0H 43H 2nH 7FH 1CH 0BH ahH amH alH F7H
| |
| +---------<PARAMETER REQUEST>
| F0H 43H 3nH 7FH 1CH 0BH ahH amH alH F7H
|
+-------------------SYSTEM EXCLUSIVE MESSAGE
IDENTITY REQUEST F0H 7EH 0nH 06H 01H F7H
[SW1] Es compatible con el canal de recepción de MIDI.
[SW2] SYSTEM MIDI Device Number
[SW3] SYSTEM Bank Select Switch
[SW4] SYSTEM Program Change Switch
(3) TRANSMIT/RECEIVE DATA
(3-1) CHANNEL VOICE MESSAGES
(3-1-1) NOTE OFF
STATUS 1000nnnn(9nH) n = 0–15 CHANNEL NUMBER
NOTE No. 0kkkkkkk k = 0(C-2)–127(G8)
VELOCITY 0vvvvvvv v = 64 Transmit
(3-1-2) NOTE ON/OFF
STATUS 1000nnnn(8nH) n = 0–15 CHANNEL NUMBER
NOTE No. 0kkkkkkk k = 0(C-2)–127(G8)
VELOCITY NOTE ON 0vvvvvvv(v≠0)
NOTE OFF 0vvvvvvv(v=0)
(3-1-3) CONTROL CHANGE
STATUS 1011nnnn(BnH) n = 0–15 CHANNEL NUMBER
CONTROL NUMBER 0ccccccc
CONTROL VALUE 0vvvvvvv
*TRANSMITTED CONTROL NUMBER
c = 0 BANK SELECT MSB ; v = 0 - 127 *1
c = 32 BANK SELECT LSB ; v = 0 - 127 *1
c = 64 SUSTAIN ; v = 0 - 127 *3
c = 1..119 ASSIGNABLE CONTROLLER ; v = 0 - 127 *2
*RECEIVED CONTROL NUMBER
c = 0 BANK SELECT MSB ; v = 0 - 127 *1
c = 32 BANK SELECT LSB ; v = 0 - 127 *1
c = 1 MODULATION ; v = 0 - 127
c = 4 PEDAL WAH ; v = 0 - 127
c = 7 CHANNEL VOLUME ; v = 0 - 127
c = 11 EXPRESSION ; v = 0 - 127
c = 64 SUSTAIN ; v = 0 - 127
c = 66 SOSTENUTO ;v=0-63:OFF, 64-127:ON
c = 67 SOFT ; v = 0 - 127
c = 84 PORTAMENTO CONTROL ; v = 0 - 127
* 1 La relación entre BANK SELECT y PROGRAM es la siguiente:
* 2 Los valores de CONTROL NUMBER predeterminados de ASSIGNABLE
CONTROLLER son los siguientes:
MODULATION WHEEL 1
FOOT PEDAL 1 64
FOOT PEDAL 2 11
*3
El tipo de pedal se ha establecido en FC3A (HalfOff) o en FC4A/
FC5 , al accionar el pedal, se transmite el valor 0
(desactivado) o 127 (activado).
La selección de banco se ejecutará realmente cuando se reciba un mensaje de
cambio de programa.
Se pasarán por alto los números de selección de banco y cambio de programa que
no sean compatibles con este instrumento.
(3-1-4) PROGRAM CHANGE
STATUS 1100nnnn(CnH) n = 0–15 CHANNEL NUMBER
PROGRAM NUMBER 00000ppp p = 0–7
(3-1-5) PITCH BEND CHANGE
STATUS 1110nnnn(EnH) n = 0–15 CHANNEL NUMBER
LSB 0vvvvvvv PITCH BEND CHANGE LSB
MSB 0vvvvvvv PITCH BEND CHANGE MSB
Transmitted with a resolution of 7 bits.
(3-2) CHANNEL MODE MESSAGES
STATUS 1011nnnn(BnH) n = 0–15 CHANNEL NUMBER
CONTROL NUMBER 0ccccccc c = CONTROL NUMBER
CONTROL VALUE 0vvvvvvv v = DATA VALUE
CATEGORY MSB LSB PROGRAM No.
Live Set Page 1 63 0 0..7
:: :
Live Set Page 20 63 19 0..7
Consulte la siguiente información para
que el cambio de control sea válido cuando
el control MIDI esté activado.