User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Panel controls
CK88 CK61 Owner’s Manual
12
The component tones produced by moving each of
the sliders are shown below.
! Part Volume Sliders
For setting the volume for each Part.
@ Part [ON/OFF] buttons
For switching each Part on or off.
# Part [A]–[C] select buttons
For selecting the desired Part for changing the
settings.
When the Part is enabled here, you can control the
following settings from the front panel.
• Voice category selection
• Organ voice settings
• MONO and UNISON settings
•Filter
•EG
•Drive
•Effect1 and Effect2
By pressing multiple Part select buttons, you can set
the same filter and effects for those selected Parts at
once.
NOTE
By simultaneously holding down two of the Part select buttons, you
can swap the settings for those Parts (page 42). This is convenient
when you wish to switch the right- and left-hand Parts for the Split
setting.
$ Display (LCD)
For displaying the system messages, parameter
settings, and other information depending on the
function currently being used.
% [SETTINGS] button
For calling up the screens for making detailed settings
for the currently selected Live Set Sound (page 28).
You can make various settings, including the Part
sound and controller customizations, Audio Trigger
function, and the effects for A/D Input.
After editing the settings, press the [STORE] button to
store the settings.
Settings made here are stored in the Live Set Sound.
NOTE
Simultaneously press the [ENTER] and [SETTINGS] buttons to
instantly initialize the Live Set Sound (page 42).
^ [EXIT] button
While using the MENU and SETTINGS screens, press
this button to exit from the current screen and return
to the previous level.
Holding down the [EXIT] button returns to the Top
screen.
Sliders Ton e
1
16' 8 scale degrees below
2
5 1/3' 5 scale degrees above
3
8' Fundamental tone
4
4' 8 scale degrees above
5
2 2/3' 12 scale degrees above
6
2' 15 scale degrees above
7
1 3/5' 17 scale degrees above
8
1 1/3' 19 scale degrees above
9
1' 22 scale degrees above
1234 56789
12
3
4
5
6
7
8
9
)
A
F
!
@
B
G
H
#
$