User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Panel controls
CK88 CK61 Owner’s Manual
15
H PAGE buttons
For switching the Live Set Page. The Live Set Sound
changes accordingly.
Simultaneously press the [l] and [r] buttons to call
up the Live Set View. In the Live Set View, you can use
the VALUE buttons and the Encoder Dial to select a
Live Set Sound from a different Live Set Page. To go
back to the Top screen, press the [EXIT] button.
I LIVE SET [1]–[8] buttons
For calling up a Live Set Sound from the eight of the
Live Set Sounds in the currently selected Live Set Page.
Change the Live Set Page using the PAGE button.
J FILTER [ON/OFF] button
FILTER [CUTOFF] knob
FILTER [RESONANCE] knob
For applying a filter to the currently selected Part.
By setting the [ON/OFF] button to off, the filter is
instantly reset to the initial value for the Voice.
[CUTOFF] knob
For setting the cutoff frequency of the low-pass filter.
The sound can be brightened by moving the knob to
the right or darkened by moving it to the left.
NOTE
How the filter is applied varies depending on the Voice being used.
[RESONANCE] knob
For setting the resonance, which changes the
character of the sound. This effect can be made more
pronounced by moving the knob to the right and less
pronounced by moving it to the left.
K EG [ON/OFF] button
EG [ATTACK] knob
EG [RELEASE] knob
For applying an EG (Envelope Generator) to the
currently selected Part.
By setting the [ON/OFF] button to off, the EG is
instantly reset to the initial value for the Voice.
[ATTACK] knob
For adjusting the attack for the EG. Turn the knob to
the left to make the attack faster, and to the right to
make the attack slower.
[RELEASE] knob
For adjusting the release for the EG. Turn the knob to
the left to make the release faster, and to the right to
make the release slower.
NOTE
How the EG is applied varies depending on the Voice being used.
Volume
Cutoff Frequency
Frequency
(pitch)
Cutoff range
These frequencies are
“passed” by the filter
Volume
Frequency
(pitch)
Resonance
Level
Key on Key off
Time
Attack Release
*
(
D
E
&
K L
O
P
M
J
N
^
C
I
$
%