User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
CK88 CK61 Owner’s Manual
24
Top screen configuration
This section explains the Top screen which appears
when the CK is turned on.
1 Live Set Sound number
Shows the currently selected Live Set Sound number.
With the initial setting, number 1-1 will be called up at
startup.
To use a different Live Set Sound number for startup,
change the setting from the [MENU] button General
System Power on Sound (page 36).
2 Voice
Shows the Voice name when the Part is on.
With some Organ voices, the Voice name and the
Drawbar settings will be shown.
3 Split and Layer
Shows the current split and layer status of each Part.
The split point is the lowest key on the right keyboard
range.
Other icons
Creating a Live Set Sound
Use the Live Set Sound for sound-making.
The basic sound-making procedures are as shown
below.
1. Select a Live Set Sound.
2. Select a Voice for each Part.
3. Set a combination of these Voices.
4. Creating an Organ voice.
5. Modify sounds using EG, Filter, Effects,
MONO, and Unison settings.
6. Save the Live Set Sound.
Saving the Live Set Sound
Edited Live Set Sounds are saved to the internal
memory of the CK by pressing the [STORE] button.
1. Press the [STORE] button.
A screen for selecting the Live Set Sound to be
stored appears.
Basic operations
4
Panel lock is on.
The setting can be changed by
simultaneously pressing both the
[ENTER] and [MENU] buttons.
5
Sound Transpose for the Live Set
Sound is set to a value other than 0
(−12 to +12).
6
Live Set EQ is set to on.
7
Audio Trigger is set to ON.
8
Master Keyboard is set to ON.
9
Connected via Bluetooth.
)
Battery level (shown only during
battery operation).
!
(For Part A)
Touch Sensitivity for the Part has
been changed.
1
4 5 6 7 8 9 )
2
@ #
3
!
@
External Keyboard for the Part is set
to ExtOnly
Play the external keyboard to sound
the internal tone generator.
#
Note Shift for the Part is set to a
value other than 0 (±24)
When the note value is −24, −12,
+12, and +24, it is shown as OCT−2,
OCT−1, OCT+1, and OCT+2
Select a voice and combine voices
Adjust the organ sound Apply sound effects
Select a Live Set Sound