User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Advanced settings
CK88 CK61 Owner’s Manual
32
Function
Function name Description
Part Color Part A
Sets the LED color for the Part.
Settings:
Red, Orange, Yel low, Lime, Green, Spring, Cyan, Azure, Blue, Violet, Magenta,
Rose
Part B
Part C
Audio
Trigger
Switch
Switches the Audio Trigger function.
Default:
Off
File
Selects the audio file to use with the Audio Trigger function.
Volume
Sets the playback volume for the audio file.
Settings:
0–127
Key Assign
Selects the key for starting playback of the audio file.
Settings:
Lowest, Highest
Default: Highest
Play Mode
Sets the playback mode for the audio file.
• One Shot: Plays back the audio file from the beginning every time the key is
pressed.
• Play/Stop: Starts or stops the playback of the audio file each time the key is
pressed. The playback starts from the beginning of the file.
• Play/Pause: Starts or pauses the playback of the audio file each time the key is
pressed. The playback resumes from the paused place.
Default:
One Shot
External
Keyboard
Determines how the Parts are played when the CK receives performance information (key-on, key-off) MIDI messages from an
external MIDI device. You can set up the CK with an external keyboard like a two-manual organ, or set up only a specific Part to
play from the external keyboard.
NOTE
For Parts that are played only from an external keyboard, the Split setting shown on the Top screen changes from to .
Part A
Part B
Part C
• Ext+Int: Internal tone generator plays sounds with both key-on signals received
from an external MIDI device and performance on the CK’s keyboard.
• ExtOnly: Internal tone generator plays sounds only for key-on signals received
from an external MIDI device. No sound is played when the keyboard on the CK
is played.
• Off: Internal tone generator does not play sounds for key-on signals received
from an external MIDI device. Sound is played only when the keyboard on the
CK is played.
Default:
Ext+Int
Connection example (for setting up the piano for Part A on the
CK61 to be played only on the MX88)
Part A = ExtOnly, Part B = Off, Part C = Off
CK61
MX88
MIDI [IN] terminal
MIDI [OUT] terminal