User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Advanced settings
CK88 CK61 Owner’s Manual
38
MIDI Advanced Device Number
Determines the MIDI device number. The device number of the CK must match the
device number of the external MIDI device when transmitting or receiving Bulk Dump,
Parameter Changes, or other System Exclusive messages.
Settings:
1–16, All, Off
Default: All
Control Delay
Adjusts the transmission timing for MIDI control messages transmitted when switching
to a different Live Set Sound. Adjust the setting when the application on your
computer does not receive messages correctly.
Settings:
0–1500 msec
Default: 0 msec
Tx/Rx Pgm
Change
Determines whether transmission/reception of Program Change messages between
the CK and external MIDI devices is enabled (On) or disabled (Off).
Default:
On
Tx/Rx Bank
Select
Determines whether transmission/reception of Bank Select messages between the CK
and external MIDI devices is enabled (On) or disabled (Off).
Default:
On
Audio Output Gain
Adjusts the overall final output level of the CK.
Settings:
−24 dB–+0 dB–+24 dB
Default: +0 dB
A/D Input Type
Selects a line input (Line) or a dynamic mic (Mic) for use as the input source from the
A/D INPUT jack.
Default:
Line
USB Audio Volume
Determines the volume of the USB Audio input.
Settings:
0–127
Default: 64
USB Audio Loopback
Determines whether to mix the USB Audio input to the USB Audio Output (On) or not
(Off).
Default:
Off
Control
Panel
Panel Lock
Settings
Live Set
Determines whether to enable (On) or disable (Off) the panel lock for each item.
Default:
On
Organ
Filter/EG
Drive/Effect
Delay/Reverb
Equalizer
Display Value Indication
Determines whether to show (On) or not show (Off) the values on the display (LCD)
when the values for the controllers of each Part are changed.
Default:
On
LCD Switch
Determines whether to show (On) or not show (Off) the Top screen on the display
(LCD).
The MENU and SETTINGS screens are always shown on the display regardless of the
settings selected here.
Default:
On
LCD Contrast
Adjusts the contrast of the Display (LCD).
Settings:
-10–+10
Default: +0
Function name Description