Owner's Manual

CL Editor Owner’s Manual

INPUT CH window

This window displays the mix parameters of INPUT CH 1–16, 17–32, 33–48, 49–64 (only CL3/CL5), or 65–72 (only CL5.)

The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-

click (<control> key + click) in the window.

You can access this window in the following ways.

• From the [Windows] menu, choose [Overview] and select CH 1–16, 17–32, 33–48, 49–64 (only CL3/CL5), or 65–72

(only CL5)

• Use the bank select keys in the Master window to turn on the [1-16] button/[17-32] button/[33-48] button/[49-64] but-

ton (only CL3/CL5), or [65-72] button (only CL5)

1 Input patch

Click here to select the input source that will be assigned to the INPUT CH, from the fol-

lowing choices.

2 HA (HA analog gain)

Drag the knob in the screen to adjust the analog gain of the internal head amp or of the

external head amp patched to the INPUT CH.

3 48V (Phantom power)

Switches on/off the phantom power (+48V) of the internal head amp or of the external head

amp patched to the INPUT CH.

NONE No assignment

DANTE 1–DANTE 64 DANTE INPUT 1

–

OMNI 1–OMNI 8 OMNI IN jacks 1

–

PB OUT L, PB OUT R L/R outputs of PLAYBACK

SLOT1-1, SLOT1-2...SLOT3-15,

SLOT3-16

Input channels of an I/O card installed in slots 1–3

FX1L(A), FX1R(B)...FX8L(A), FX8R(B) L/R outputs of EFFECT rack 1

–

PR1L(A), PR1R(B), PR2L(A), PR2R(B) L/R outputs of PREMIUM rack 1

–

Overview window