Owner's Manual

CL Editor Owner’s Manual

EFFECT page

1 Mount

Select an effect module or GEQ module for mounting in the rack, from the following choices.

2 Input patch

Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to

the L/R input channels of the internal effect. This is not shown if nothing is mounted in the rack.

BLANK No assignment

31BandGEQ 31-band 1-in/1-out graphic equalizer

Flex15GEQ 2-in/2-out graphic equalizer that allows any fifteen of the 31 bands to be controlled

EFFECT Internal effect

NONE No assignment

MIX 1–24 MIX channel 1–24

MATRIX1–8 MATRIX channel 1–8

ST L, ST R, MONO(C) STEREO channel L/R, MONO channel

INS1 CH 1–72(*) INPUT channel 1–72(*) insert out 1

INS1 MIX 1–24 MIX channel 1–24 insert out 1

INS1 MTRX1–8 MATRIX channel 1–8 insert out 1

INS1 ST L, INS1 ST R, INS1 M(C) Insert out 1 of STEREO channel L/R or the MONO channel

1 2 3 4 56