Owner's Manual

CL Editor Owner’s Manual

Here you can make settings for the Fade Time function which adjusts the time over which fader and pan will reach their

new values when a scene is recalled. Since the Fade function settings are independent for each scene, you must recall the

desired scene before you make these settings.

1 INPUT/ST IN/DCA

These on/off buttons select the input channels that will be excluded from recall operations.

2 SET ALL

This button switches on the buttons of all input channels.

3 CLEAR ALL

This button switches off the buttons of all input channels.

4 MIX, MATRIX, STEREO/MONO

These are on/off buttons that select the output channels that will be excluded from recall operations.

5 SET ALL

This button switches on the buttons of all output channels.

6 CLEAR ALL

This button switches off the buttons of all output channels.

7 FADING ENABLE

This button enables/disables the Fade function for the faders of the current scene.

8 FADE TIME

Drag this knob in the screen to adjust the fade time. The current value is shown in the numerical box immediately

below.