Owner's Manual

CL Editor Owner’s Manual

This window shows the channels of the custom fader bank setup. To open this window, choose [Custom Fader Bank] from

[Windows] menu and then choose one of the pages.

1 Channel Patch

Click here to select the channel that will be assigned to the channel strips, from the following choices.

(*) CL3: 1–64, CL1: 1–48

This patch is color-coded and indicates the type of channel as follows:

Blue: Input channels

Orange: Output channels

White: Other channels.

2 Channel Strip

Shows the channel strip that is assigned to the channel patch. This is the same as the channel strip in the Overview window.

Indicates only L or R channel for the ST IN and ST channel. You can switch between L and R by clicking the [SEL] button.

CH 1–72(*) INPUT CH 1–72(*)

STIN1L-STIN8R ST IN channel 1–8 (L/R)

MIX 1–24 MIX channel 1–24

MTRX1–8 MATRIX channel 1–8

ST L, ST R, MONO(C) STEREO channel L/R or MONO(C) channel

DCA 1–16 DCA channel 1–16

MONITOR MONITOR channel

STIN 1–8 ST IN channel 1–8

ST STEREO channel

CUE CUE channel

SEL CH Selected channel

SEND MSTR SEND MASTER (in SENDS ON FADER mode)

Custom Fader Bank window