User Manual

Scene memory
V2.0 Supplementary Manual
8
Scene memory
Added scene memory function
Now you can create a read-only scene memory.
By specifying certain scenes as read-only, you can prevent those scenes from being overwritten when
you load a console file.
■ SCENE LIST window
1 R symbol (READ ONLY)/Protect symbol
An “R” symbol is displayed for read-only scenes, and a protect (lock) icon is displayed for write-
protected scenes.
To enable/disable the scene protect setting, press the R symbol or protect symbol of the selected
scene. Pressing the protect (lock) symbol or the R (read-only) symbol repeatedly will switch
between displaying and hiding the corresponding symbol.
• Protect (lock) symbol
You will be unable to overwrite the scene.
• R (READ ONLY) symbol
Not only will the scene be protected, it will also not be overwritten by any file loaded from a USB
flash drive. You can only apply the protect setting to scenes with consecutive scene numbers
starting with scene #001.
•No symbol
No scene will be protected.
NOTE
The R symbol for scene number 000 cannot be disabled.
1