User Manual

ShureWirelesswithYamahaCL/QL
www.yamahaproaudio.com
12
Whenever the console patch is changed, the ULXD settings will follow the Dante
patch to appear on the assigned channel.
If there are additional CL/QL consoles in the Dante network, the UXLD4D/Q devices
can be mounted to as many as four consoles, and monitored from multiple locations.
The DIGITAL GAIN in the receiver can be controlled for the ULX-D and QLX-D. TX.
GAIN, which is the ANALOG GAIN before A/D in the transmitter, can be controlled
for AXT.
6.2 Input Channel Control of ULXD4 / QLXD4 / AXT400
Because these devices don’t use Dante, an additional step is needed to provide
control functions from the input channel.
7. Back in the I/O DEVICE menu, WIRELESS tab, select the device from the
left-side of the screen.
8. Open the I/O DEVICE pop-up by touching the control area in the centre of the
screen.
9. Touch the PORT ASSIGN tab at the bottom of the window.
10. Select which input port is being used to bring the wireless microphone’s audio
into the console. It could be a Dante port (if using Rio3224-D or RSio64-D as
an audio interface for example), a SLOT port, or an OMNI input on the rear of
the console.