User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Touch
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Startup
- Basic process
- Operations for common settings
- About the menu bar
- Settings file management — the File Management button
- Selecting multiple widgets — Multi Select button
- Creating a custom panel — the Page Edit button
- Widget design
- Assigning parameters
- Switching pages — the Page Selection button (Control mode)
- Managing pages — the Page Management button (Design mode)
- Registering devices to control — the Device Management button
- Control panel settings — the Setup button
- Control panel information — the Information button
- Preparations before you make connections
- Troubleshooting
- About the software license
77
Can’t connect eight iPad units
to one XMV/EXi8/EXo8.
Of the eight sessions simultane-
ously connected to the XMV/EXi8/
EXo8, one session is used for
communication between the MTX/
MRX and the XMV/EXi8/EXo8.
For this reason, a maximum of
seven external control devices
can be connected.
Use a maximum of seven iPad units to control the XMV/EXi8/EXo8.
Can’t control an NXAMPmk2. The UNIT ID of the NXAMPmk2 is
set to 0.
Set the NXAMPmk2 that you want to control to a UNIT ID other than 0.
A file won’t open. You’re attempting to load a KIOSK
file into ProVisionaire Touch.
Specify a settings file with the correct .ypvt extension.
Nothing is shown for Disklavier
or track list.
The assigned device is not con-
nected to the network.
Connect the assigned device to the network.
Can’t delete an unneeded
RCSL file, etc.
Using the iPad itself, it is not pos-
sible to delete files in “shared
files.”
Use iTunes to delete the file.
1. Connect the iPad to your computer.
2. Click the iPad button that appears in iTunes, and then click [App] or
[File Sharing].
3. In “File Sharing,” in the list shown at right, select the file that you
want to delete.
4. Press the <Delete> key and then click [Delete].
Can’t use iTunes to upload a
PDF file or image file to the
PDFs folder or Images folder.
Subfolders will not open in iTunes. Use your computer to create a PDFs folder or Images folder, place the
PDF file or image file in that folder, and use “Share files” to overwrite the
entire folder. The same applies when replacing a file.
Don’t know how to specify the
device’s IP address.
—
Refer to the owner’s manual of the device or the application that con-
trols it via the network.
Problem Cause Action