User Manual

ManualsBrandsYamaha ManualsMixersDIGITAL MIXING CONSOLE

261

262

263

264

265

266

267

268

269

270

Table Of Contents

How to Use This Reference Manual
Table of contents
Function Tree
SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL Section
Centralogic section
- Operations in the Centralogic section
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the input patching
- Changing the output patching
- Inserting an external device into a channel
- Directly outputting an INPUT channel
Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
OUTPUT channels
- Signal flow for output channels
- Specifying the channel name/icon
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- Using EQ
- Using dynamics
- Using the EQ/Dynamics libraries
Channel Job
- DCA group
- DCA Roll-out function
- Mute group
- Using the Recall Safe function
- Channel Link function
- Copying, moving, or initializing a channel
- About Mix Minus
Scene memory
- Storing and recalling scenes
- Editing scene memories
- Using the Global Paste function
- Using the Focus Recall function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
Talkback and Oscillator
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About AUTOMIXER
- Editing the internal effects
- Effects and tempo synchronization
- Using the Premium Rack
- Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries
I/O devices and external head amps
- Using an I/O device
- Remotely controlling an R series unit
- Remotely controlling an amp
- Remotely controlling WIRELESS unit
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using program changes to recall scenes and library items
- Using control changes to control parameters
- Using Parameter Changes to control parameters
Recorder
- About the USB memory recorder
- Assigning channels to the input/output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Recording or playing back using a computer DAW
- Using the CL console with Nuendo Live
Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Using GPI (General Purpose Interface)
Help function
- Loading a Help/text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
Warning/Error Messages
Index
Data List
- Table of Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart

Data List

 MOD. DELAY

One input, two output basic repeat delay with modulation.

 DELAY LCR

One input, two output 3-tap delay (left, center, right).

 ECHO

Two input, two output stereo delay with crossed feedback loop.

 CHORUS

Two input, two output chorus effect.

Parameter Range Description

DELAY 0.0-2725.0 ms Delay time

FB. GAIN -99 to +99% Feedback gain

HI. RATIO 0.1-1.0 High-frequency feedback ratio

FREQ. 0.05-40.00 Hz Modulation speed

DEPTH 0-100% Modulation depth

WAVE Sine/Tri Modulation waveform

HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency

LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency

SYNC OFF/ON Tempo parameter sync on/off

DLY.NOTE

*1. (Maximum value depends on the tempo setting)

Used in conjunction with TEMPO to determine DELAY

MOD.NOTE

*2.

Used in conjunction with TEMPO to determine FREQ

Parameter Range Description

DELAY L 0.0-2730.0 ms Left channel delay time

DELAY C 0.0-2730.0 ms Center channel delay time

DELAY R 0.0-2730.0 ms Right channel delay time

FB. DLY 0.0-2730.0 ms Feedback delay time

LEVEL L -100 to +100% Left channel delay level

LEVEL C -100 to +100% Center channel delay level

LEVEL R -100 to +100% Right channel delay level

FB. GAIN -99 to +99%

Feedback gain (plus values for normal-phase feedback, minus values for

reverse-phase feedback)

HI. RATIO 0.1-1.0 High-frequency feedback ratio

HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency

LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency

SYNC OFF/ON Tempo parameter sync on/off

NOTE L

*1. (Maximum value depends on the tempo setting)

Used in conjunction with TEMPO to determine left channel DELAY

NOTE C

Used in conjunction with TEMPO to determine center channel DELAY

NOTE R

Used in conjunction with TEMPO to determine right channel DELAY

NOTE FB

Used in conjunction with TEMPO to determine feedback DELAY

Parameter Range Description

DELAY L 0.0-1350.0 ms Left channel delay time

DELAY R 0.0-1350.0 ms Right channel delay time

FB.DLY L 0.0-1350.0 ms Left channel feedback delay time

FB.DLY R 0.0-1350.0 ms Right channel feedback delay time

FB. G L -99 to +99%

Left channel feedback gain (plus values for normal-phase feedback, minus

values for reverse-phase feedback)

FB. G R -99 to +99%

Right channel feedback gain (plus values for normal-phase feedback,

minus values for reverse-phase feedback)

LR FBG -99 to +99%

Left to right channel feedback gain (plus values for normal-phase feedback,

minus values for reverse-phase feedback)

RL FBG -99 to +99%

Right to left channel feedback gain (plus values for normal-phase feedback,

minus values for reverse-phase feedback)

HI. RATIO 0.1-1.0 High-frequency feedback ratio

HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency

LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency

SYNC OFF/ON Tempo parameter sync on/off

NOTE L

*1. (Maximum value depends on the tempo setting)

Used in conjunction with TEMPO to determine left channel DELAY

NOTE R

Used in conjunction with TEMPO to determine right channel DELAY

NOTE FBL

Used in conjunction with TEMPO to determine left channel feedback

DELAY

NOTE FBR

Used in conjunction with TEMPO to determine right channel feedback

DELAY

Parameter Range Description

FREQ. 0.05-40.00 Hz Modulation speed

AM DEPTH 0-100% Amplitude modulation depth

PM DEPTH 0-100% Pitch modulation depth

MOD. DLY 0.0-500.0 ms Modulation delay time

WAVE Sine, Tri Modulation waveform

SYNC OFF/ON Tempo parameter sync on/off

NOTE

*1.

Used in conjunction with TEMPO to determine FREQ

LSH F 21.2 Hz-8.00 kHz Low shelving filter frequency

LSH G -12.0 to +12.0 dB Low shelving filter gain

EQ F 100 Hz-8.00 kHz EQ (peaking type) frequency

EQ G -12.0 to +12.0 dB EQ (peaking type) gain

EQ Q 10.0-0.10 EQ (peaking type) bandwidth

HSH F 50.0 Hz-16.0 kHz High shelving filter frequency

HSH G -12.0 to +12.0 dB High shelving filter gain