User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Talkback and Oscillator
V5 Reference Manual
130
MONITOR screen
In the MONITOR screen, the TALKBACK field enables you to check the current talkback
settings, and turn talkback on or off.
1 TALKBACK display buttons
When you press this button, the TALKBACK screen will appear, in which you can make
detailed talkback settings.
2 TALKBACK IN field
• +48V indicator ........................ Indicates the on/off status of the +48V phantom power
supplied to the TALKBACK jack.
• Input level meter................... Indicates the level of signals after the input gain at the
TA L KBACK jac k .
3 INPUT TO TALKBACK field
• INPUT TO TALKBACK patch button
........................ Press the button to open the PORT SELECT window, in
which you can patch a desired input port to talkback.
The selected port name will appear on the button.
• INPUT GAIN knob................. Sets the input gain of the selected port.
• Input level meter................... Indicates the level of signals after the input gain.
4 TALKBACK ASSIGN field
An indicator lights to indicate the currently-selected output destination of the talkback
signal.
5 TALKBACK ON button
Switches talkback on or off.
TALKBACK window
You can make detailed settings for talkback. This window appears when you press the
TALKBACK display button in the MONITOR screen.
TALKBACK IN field
This field enables you to make settings for the TALKBACK jack on the front panel.
1 +48V button
Switches on or off the phantom power (+48V) supplied to the TALKBACK jack.
2 TALKBACK level meter
This indicates the input level of the mic connected to the TALKBACK jack.
INPUT TO TALKBACK field
This field enables you to route a signal from a mic (connected to a normal input jack) to
talkback. If you want to use an input jack other than the TALKBACK jack as supplementary
input for talkback, select an input port here and set the input level.
3 INPUT TO TALKBACK patch button
Press this button to open the PORT SELECT window, in which you can select an input
port.
1 2 3 4 5
1
2
3 4 6 8 975
0
A