User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
- Warning/Error Messages
- Index
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Function Tree
V5 Reference Manual
5
NOTE
• The explanations in this reference manual will use the CL5.
• In the case of the CL3/CL1, some screens will not show
channels and faders that do not exist on those models.
WORD CLOCK/SLOT SETUP 246
CASCADE IN/OUT PATCH 249, 251
OUTPUT PORT 63
MIDI/GPI 192, 271
MIDI SETUP 193
PROGRAM CHANGE 195
CONTROL CHANGE 198
GPI 271
FADER START 274
BUS SETUP 252
SURROUND SETUP 214
CONSOLE LOCK 238
DATE/TIME 254
NETWORK 255
DANTE SETUP 257
SCENE
SCENE LIST 97
GLOBAL PASTE 103
Fade time 107
SONG SELECT 111
FOCUS RECALL 105
RECORDER
USB 200
NUENDO LIVE 209
CH JOB
CH LINK MODE 86
DCA GROUP ASSIGN 75
MUTE GROUP ASSIGN 80
RECALL SAFE MODE 83
CH COPY MODE 90
CH MOVE MODE 92
CH DEFAULT MODE 93
SETUP PATCH
PORT SELECT
26, 28, 117, 125,
174, 250
CH SELECT 23, 142, 201
Others
CONFIRMATION 223
SOFT KEYBORD (21)
LOGIN 218
Startup Menu
MODE SELECT 278
INITIALIZE ALL MEMORIES 278
INITIALIZE CURRENT MEMORIES 278
TOUCH SCREEN CALIBRATION 278
INPUT PORT TRIM 280
OUTPUT PORT TRIM 280
SLOT OUTPUT TRIM 280
FADER CALIBRATION 279
LED COLOR CALIBRATION 281