User Manual
Table Of Contents
- このリファレンスマニュアルの使い方
- 目 次
- 機能ツリー図
- セレクテッドチャンネルセクション
- Centralogicセクション
- 入出力のパッチング
- インプット系チャンネル
- アウトプット系チャンネル
- EQ/ダイナミクス
- チャンネルジョブ
- シーンメモリー
- モニター/キュー
- トークバック/オシレーター
- メーター
- グラフィックEQ/パラメトリックEQ/エフェクト/ PREMIUM RACK
- I/Oデバイスと外部ヘッドアンプ
- MIDI
- レコーダー
- AFC IMAGEコントロール
- セットアップ
- SETUP画面について
- ユーザー設定
- プリファレンス設定
- USER DEFINEDキー
- USER DEFINEDキーに割り当て可能な機能
- USER DEFINEDノブ
- USER DEFINEDノブに割り当て可能な機能
- アサイナブルエンコーダー
- ASSIGNABLE ENCODERに割り当て可能な機能
- GAIN/PAN/ASSIGNノブ(アサイナブルエンコーダー)の機能
- カスタムフェーダーバンク
- メインフェーダー
- カスタムフェーダーバンクの機能について
- コンソールロック
- 設定データをUSBメモリーにセーブ/ロードする
- USBメモリーをフォーマットする
- ワードクロック/スロットの設定
- カスケード接続を利用する
- MIXバス/MATRIXバスの基本設定
- ファンタム電源全体のオン/ オフを切り替える
- タッチスクリーン/LED/ネーム表示/ランプの輝度を設定する
- 内蔵時計の日時を合わせる
- ネットワークアドレスを設定する
- Danteオーディオネットワークの設定
- Dante Device Lock
- Dante Domain Manager (DDM)対応
- GPI (汎用インターフェース)を使う
- ヘルプ機能
- そのほかの機能
- ワーニング/エラーメッセージ
- 索引
- Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Data List
13
AUTOPAN
Two input, two output autopanner.
ROTARY
One input, two output rotary speaker simulator.
RING MOD.
Two input, two output ring modulator.
MOD.FILTER
Two input, two output modulation filter.
DYNA.FILTER
Two input, two output dynamically controlled filter.
Parameter Range Description
FREQ. 0.05-40.00 Hz Modulation speed
DEPTH 0-100% Modulation depth
DIR.
*1
*1. L↔R, L→R, L←R, Tur n L, Tu r n R
Panning direction
WAVE Sine, Tri, Square Modulation waveform
SYNC OFF/ON Tempo parameter sync on/off
NOTE
*2
*2.
Used in conjunction with TEMPO to determine FREQ
LSH F 21.2 Hz-8.00 kHz Low shelving filter frequency
LSH G -12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz-8.00 kHz EQ (peaking type) frequency
EQ G -12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0-0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz-16.0 kHz High shelving filter frequency
HSH G -12.0 to +12.0 dB High shelving filter gain
Parameter Range Description
ROTATE STOP, START Rotation stop, start
SPEED SLOW, FAST
Rotation speed
(see SLOW and FAST parameters)
SLOW 0.05-10.00 Hz SLOW rotation speed
FAST 0.05-10.00 Hz FAST rotation speed
DRIVE 0-100 Overdrive level
ACCEL 0-10 Acceleration at speed changes
LOW 0-100 Low-frequency filter
HIGH 0-100 High-frequency filter
Parameter Range Description
SOURCE OSC, SELF Modulation source: oscillator or input signal
OSC FREQ 0.0-5000.0 Hz Oscillator frequency
FM FREQ. 0.05-40.00 Hz Oscillator frequency modulation speed
FM DEPTH 0-100% Oscillator frequency modulation depth
SYNC OFF/ON Tempo parameter sync on/off
FM NOTE
*1
*1.
Used in conjunction with TEMPO to determine FM FREQ
Parameter Range Description
FREQ. 0.05-40.00 Hz Modulation speed
DEPTH 0-100% Modulation depth
PHASE 0.00-354.38 degrees Left-channel modulation and right-channel modulation phase difference
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0-100 Filter frequency offset
RESO. 0-20 Filter resonance
LEVEL 0-100 Output level
SYNC OFF/ON Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with TEMPO to determine FREQ
Parameter Range Description
SOURCE INPUT, MIDI
Control source:
input signal or MIDI Note On velocity
SENSE 0-100 Sensitivity
DIR. UP, DOWN Upward or downward frequency change
DECAY
*1
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)
Filter frequency change decay speed
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0-100 Filter frequency offset
RESO. 0-20 Filter resonance
LEVEL 0-100 Output level