User Manual
Dante Controller ユーザーガイド
76
起動時のエラーメッセージ
エラーメッセージ
症状と対策
'Dante Controller was unable to connect to the
Dante Control and Monitoring manager. Dante
Controller cannot function without this
connection. This problem is most likely caused
by the Dante Control and Monitoring ('conmon')
service or daemon stopping unexpectedly. Click
OK to restart Dante Controller. You may also
need to manually restart the Dante Control and
Monitoring service, or the computer, if the
problem reoccurs.'
対象
:
OS:Windows
のみ
症状: Dante コントロールとモニターサービスが応答して
いません。コンピュータがスリープモードになったときに
この問題が発生する場合があります。
対策: Dante Controller を再起動します。それでも解決し
ない場合は、パソコンを再起動するか、コントロールパネ
ル>管理ツール>サービス を選択し、Dante コントロール
とモニターサービスを再起動してください。
'The installed version [x] of the Dante Control
and Monitoring service (‘ConMon’) is out of
date.
This version of Dante Controller requires
ConMon version [x] or later.
Please reinstall Dante Controller to resolve this
issue. Dante Controller will now exit.'
対象: OS:Windows および Mac OS X
症状: 他の Dante ソフトウェアにより Dante Controller が
インストールされ、ConMon サービスが古いバージョンで
書き換えられた可能性があります。
対策: Dante Controller を再インストールします。これに
より ConMon サービスを最新バージョンにアップデートで
きます。
'The installed version [x] of the Dante Discovery
service is out of date.
This version of Dante Controller requires Dante
Discovery version [x] or later.
Please reinstall Dante Controller to resolve this
issue.
Dante Controller will now exit.'
対象
:
OS:Windows
のみ
症状: 他の Dante ソフトウェアにより Dante Controller が
インストールされ、Dante Discovery サービスが古いバー
ジョンで書き換えられた可能性があります。
対策: Dante Controller を再インストールします。これに
より Dante Discovery サービスを最新バージョンにアップ
デートできます。
パソコンの設定確認リスト
Dante Controller をインストールする前に、必ずアドミニストレーターとしてパソコンにログインし
てください。
Dante ネットワークで使用するためにパソコンを正しく設定するには、以下の内容を確認してくださ
い。
Dante Controller がインストールされていること
正しいネットワークインターフェースが選択されていること
正しい IP アドレスが使用されていること