User Manual
Table Of Contents
- Cover
- Contents
- Introduction
- Controls and Connectors
- Panel Operations
- Basic Operations
- Screen Structure
- Operations that can be Performed from the Panel
- Alert Messages
- HOME Screen
- METER Screen
- SETTING Screen
- UTILITY Screen
- MENU Screen
- SIGNAL PATH Screen
- SIGNAL PATH Block Diagrams
- Recalling library settings (Speaker Processor only)
- Slot Input Router
- Input On/Off
- 4x4 Matrix Mixer
- 8Band Input EQ
- Input Delay
- Oscillator Mix
- X-Over Input Level (Speaker Processor)
- X-Over Polarity (Speaker Processor)
- X-Over (Speaker Processor)
- Output Delay (Speaker Processor)
- 6Band Output EQ (Speaker Processor)
- Output Level (Speaker Processor)
- Mute On/Off (Speaker Processor)
- Limiter (Speaker Processor)
- Output Router
- SCENE Screen
- Initializing the internal memory
- System Connection Examples
- Connecting External Controllers and Analog Devices
- Adjusting the Input/Output Levels
- Appendix
TX6n/5n/4n Reference Manual
24
Panel Operations
■ Misc Setup
Here you can set the amplifier’s internal clock, etc.
Here you can make general settings for the amplifier in each category such as checking for broken connections,
measuring the speaker impedance, and settings for protection conditions.
● Setting procedure
1. In the HOME screen, press the second-from-right function button (MENU) to access the MENU screen.
2. Use encoder A or B to select the sub-category that you want to edit, and press the [ENTER] button to access
the screen for that sub-category.
Parameter name Range Explanation
Clock Day-Month-Year
Hour:Minute
Sets the amplifier’s internal clock. This is used when recording the event
log. If daylight saving time has been enabled from Amp Editor, “DST”
will appear before the day. This can be set at a specific time everyday
from Amp Editor.
HOME screen Mode SCENE/LIBRARY Specifies whether the name shown in the HOME screen will be the
scene name or the Speaker Processor’s library name.
MENU Screen