User Manual
Table Of Contents
- Cover
- Contents
- Introduction
- Controls and Connectors
- Panel Operations
- Basic Operations
- Screen Structure
- Operations that can be Performed from the Panel
- Alert Messages
- HOME Screen
- METER Screen
- SETTING Screen
- UTILITY Screen
- MENU Screen
- SIGNAL PATH Screen
- SIGNAL PATH Block Diagrams
- Recalling library settings (Speaker Processor only)
- Slot Input Router
- Input On/Off
- 4x4 Matrix Mixer
- 8Band Input EQ
- Input Delay
- Oscillator Mix
- X-Over Input Level (Speaker Processor)
- X-Over Polarity (Speaker Processor)
- X-Over (Speaker Processor)
- Output Delay (Speaker Processor)
- 6Band Output EQ (Speaker Processor)
- Output Level (Speaker Processor)
- Mute On/Off (Speaker Processor)
- Limiter (Speaker Processor)
- Output Router
- SCENE Screen
- Initializing the internal memory
- System Connection Examples
- Connecting External Controllers and Analog Devices
- Adjusting the Input/Output Levels
- Appendix
TX6n/5n/4n Reference Manual
32
Panel Operations
■ Recalling library settings (Speaker Processor only)
You can save Speaker Processor component settings from Amp Editor as library data, and recall the settings from the ampli-
fier’s front panel. The library saves all parameters of the Speaker Processor components.
• By default, the library provides presets for Yamaha’s Installation series speakers.
•You can convert the library files created for the DME series or SP2060 by Amp Editor and use them.
1. In the SIGNAL PATH screen, use encoder A or B to select “SP Proc” (Speaker Processor), and press the
[ENTER] button to access the Speaker Processor screen.
2. Press the right-most function button (LIB.) to access the library screen.
3. Use encoder A or B to select the settings that you want to recall.
4. Press the second-from-left function button (CH A/B) to switch the recall-destination channel.
5. Press the left-most function button (RECALL).
The recall confirmation screen will appear.
6. Press the [ENTER] button to execute the recall.
If you decide to cancel the operation, press the [EXIT] button.
NOTE