User Manual

Chapter 10 Component editor (TXn only)
Amp Editor Owner’s Manual
158
 Recalling a library item
You can load a stored parameter set into the component. To recall a library item, use the Library [RECALL] but-
ton. When you recall a library item, the parameter set will be stored in the currently selected Snap button.
1. Click the snap button ([A]–[D]) in which you want to store the parameter set.
2. Click the Library [RECALL] button.
The library items in the User Library folder, the library items in the project folder, and the pre-installed
library items will be displayed as the Library [RECALL] menu.
3. Click a library item name (file name) in the Library [RECALL] menu.
The parameters of the library item will be recalled.
• Library items that were saved in folders other than the User Library folder or the project folder
are not shown in the Library [RECALL] menu. You can recall such a file by clicking [Open File
Dialog] in the Library [RECALL] menu, and selecting it in the dialog box that appears.
For a Speaker Processor component
NOTE