User Manual

Chapter 10 Component editor (TXn only)

Amp Editor Owner’s Manual

172

 Oscillator

This is a mono-channel oscillator. It generates a sine wave, pink noise, or burst noise.

 Pink noise

This is a reference signal used for acoustical measurements. Across the frequency band of 20 Hz–20 kHz,

doubling the frequency will halve the energy. The loudness will be the same for each frequency band.

 Burst noise

Pink noise will be output intermittently.

Section Parameter Range Function

Wave Form

Sine

100Hz, 1kHz,

10kHz, Vari

Selects the frequency/waveform that will be gen-

erated. You can select only one of the six [Sine] or

[Noise] buttons.

w Noise Pink, Burst

e Frequency 20Hz–20kHz

If you selected the Sine wave [Vari] as the Wave

Form, this specifies the frequency of the sine

wave that will be generated.

Output

Level -

–±0dB Specifies the output signal level.

t ON On/Off Switches the oscillator on/off.