User Manual

Chapter 3 Setup

Amp Editor Owner’s Manual

 Windows Vista / 7 / 8 users

1. Access the Control Panel, then click or double-click [Network and Sharing Center] or

[View network status and tasks].

The “Network and Sharing Center” is displayed.

2. Click [Manage network connection] or [Change adapter settings] from the “Tasks” list

located in the left side of “Network and Sharing Center” window, then double-click [Local

Area Connection].

The “Local Area Connection Status” dialog box will be displayed.

• The “User Account Control” dialog box may appear. Click [Continue].

• If the “Local Area Connection properties” dialog box appears, skip ahead to step 4.

3. Click [Properties].

The “Local Area Connection properties” dialog box will be displayed.

• The “User Account Control” dialog box may appear. Click [Continue].

4. Select [Internet Protocol Version 4(TCP/IPv4)], then click [Properties].

The “Internet Protocol Version 4(TCP/IPv4) Protocol” dialog box will be displayed.

5. Select [Use the following IP address], and set the [IP address] and [Subnet mask].

We recommend an [IP address] value of “192.168.0.253” and a [Subnet mask] value of “255.255.255.0”.

6. Click the [OK] button to close the dialog box.

NOTE