User Manual

Chapter 5 Main panel window

Amp Editor Owner’s Manual

 Copying the Library data between amplifiers

1. In the Device list, click the copy source amplifier.

2. Click the [Copy] button.

3. In the Device list, click the copy destination amplifier.

You can select multiple amplifiers by holding down the <Shift> key or <Ctrl> key while making your

selection.

4. Click the [Paste] button.

Amp Editor pastes the Library list data.

5. Click the [To Device] button.

The copied Library list data is applied to the copy destination amplifier.

 Device list

Lists the amplifiers that support the Speaker Processor component.

• Amplifiers that are not online in the network will also be listed. However, be sure to keep the ampli-

fier that you want to edit online.

 Device/ID/Model/IP Address

Indicates the name, Device ID, model name, and IP address of the amplifier.

 Edit

If the changes you made by editing the library data in Amp Editor have not been applied to the amplifier

itself, an “E” will be shown here.

 From Device

If the amplifier Library data was sent correctly to Amp Editor, “*” will be displayed.

NOTE